2010 USNCTAM Congress Chair
Judith A. Todd
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
Ph/Fax: 814-863-0771/865-9974
jtodd@psu.edu

2010 USNCTAM Technical Program Chair
Charles E. Bakis
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
Ph/Fax: 814-865-3178/865-9974
cbakis@psu.edu

2010 USNCTAM Technical Program Vice Chair
Joseph P. Cusumano
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
Ph/Fax: 814-865-3179/865-9974
jpcusumano@psu.edu

2010 Congress Planning Committee Chair
Sabih I Hayek
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
ic8@psu.edu

2010 Congress Planning Committee Vice Chair
Sam Zamrik
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
syzesm@engr.psu.edu

Penn State Organizing Committee
Chimay J. Anumba, Head
Dept. of Architectural Engineering
104 Engineering Unit A
University Park, PA 16802
cja16@psu.edu

Anthony A. Atchley, Associate Dean
The Pennsylvania State University
Acoustics Program
101 Hammond Bldg.
University Park, PA 16802
aaa9@psu.edu

Renata Engel, Associate Dean for Undergraduate Studies
The Pennsylvania State University
College of Engineering
101 Hammond Bldg.
University Park, PA 16801
rse1@psu.edu

Peggy Johnson, Department Head
The Pennsylvania State University
Dept. of Civil and Environmental Engineering
212 Sackett Bldg.
University Park, PA 16802
paj6@psu.edu

George A. Lesieutre, Department Head
The Pennsylvania State University
Dept. of Aerospace Engineering
229 Hammond Bldg.
University Park, PA 16802
gal4@psu.edu

Herbert H. Lipowsky, Chair
The Pennsylvania State University
Dept. of Bioengineering
233 Hallowell Bldg.
University Park, PA 16802
hhl2@psu.edu

Robert N. Pangborn, Dean for Undergraduate Education
The Pennsylvania State University
417 Old Main
University Park, PA 16802
rnp1@psu.edu

Karen Thole, Department Head
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
137 Reber Bldg.
University Park, PA 16802
kat18@psu.edu

Roy E. Young, Head
Dept. of Agricultural & Biological Engineering
250 Agricultural Engineering Bldg.
University Park, PA 16802
rey2@psu.edu

Penn State Technical Program Subcommittee
James Brasseur
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
205 Reber Bldg.
University Park, PA 16802
jgb3@psu.edu

Francesco Costanzo
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
fxc8@psu.edu

Corinna Drapaca
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
csd12@psu.edu

Bruce J. Gluckman
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
bjg18@psu.edu

Gary L. Gray
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
gray@engr.psu.edu

Aman Haque
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
317A Leonhard Bldg.
University Park, PA 16802
mah37@psu.edu

Tony Huang
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
junhuang@psu.edu

Kevin L. Koudela
The Pennsylvania State University
Applied Research Laboratory
155 ARL Bldg.
University Park, PA 16802-6812
klk121@psu.edu

Clifford J. Lissenden
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
lissenden@psu.edu

Eric M. Mockensturm
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
157C Hammond Bldg.
University Park, PA 16802
emm10@psu.edu

Eric G. Paterson
The Pennsylvania State University
Applied Research Laboratory
165 ARL Bldg.
University Park, PA 16802-6812
egp11@psu.edu

Joseph L. Rose
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
jlr9@psu.edu

Albert E. Segall
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
aesegall@psu.edu

Gary S. Settles
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
301D Reber Bldg.
University Park, PA 16802
gss2@psu.edu

Kendra V. Sharp
The Pennsylvania State University
Dept. of Mechanical and Nuclear Engineering
157D Hammond Bldg.
University Park, PA 16802
kvs10@psu.edu

Bernhard R. Tittmann
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
brt4@psu.edu

Eduard S. Ventsel
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
esvesm@engr.psu.edu

Sulin Zhang
The Pennsylvania State University
Dept. of Engineering Science and Mechanics
212 Earth-Engineering Sciences Bldg
University Park, PA 16802-6812
suz10@psu.edu