1-9

Modeling & Simulation I   (Technical Session)

No.of Papers: 3  

4-6

Chemical Kinetics   (Technical Session)

No.of Papers: 3  

4-11

Combustion Instabilities Analytical/Numerical I   (Technical Session)

No.of Papers: 4  

5-3

Control Systems I   (Technical Session)

No.of Papers: 4  

6-17

Cycle Optimisation II - Gas turbine durability and failure modelling   (Technical Session)

No.of Papers: 3  

9-15

Vane-Blade HT Interactions III   (Technical Session)

No.of Papers: 4  

10-1

Trench Film Cooling   (Technical Session)

No.of Papers: 4  

11-2

Rotating Disc Cavities and Rim Sealing   (Technical Session)

No.of Papers: 4  

15-4

Mechanical Properties and Behavior of Materials   (Technical Session)

No.of Papers: 3  

16-2

Engine System Design and Development   (Technical Session)

No.of Papers: 4  

17-3

Combustion, Fuels & Emissions   (Technical Session)

No.of Papers: 4  

20-4

Fatigue & Fracture Mechanics Life Methods   (Technical Session)

No.of Papers: 4  

22-1

Air and Foil Bearings I   (Technical Session)

No.of Papers: 4  

26-1

Design, Analysis and Test I   (Technical Session)

No.of Papers: 3  

27-3

Low Pressure Turbines I   (Technical Session)

No.of Papers: 4  

29-1

General Interest   (Technical Session)

No.of Papers: 3  

31-4

Centrifugal Compressors I   (Technical Session)

No.of Papers: 4  

32-4

Leakage Flows and Design Optimization in Steam Turbines   (Technical Session)

No.of Papers: 4  

33-3

Transition and Separation   (Technical Session)

No.of Papers: 3  

35-1

Industrial Gas Turbine and Aircraft Engine Technology Awards Lectures   (Lecture Session)

No.of Papers: 4  

1-12

Secondary Flows and Accessories   (Technical Session)

No.of Papers: 5  

3-2

Gasification, Pyrolysis and Syngas in Gas Turbine   (Technical Session)

No.of Papers: 6  

4-8

Combustion Instabilities Experimental II   (Technical Session)

No.of Papers: 6  

4-21

Combustor Operability & Interactions with Compressor and Turbine   (Technical Session)

No.of Papers: 6  

5-2

Gas Path Analysis I   (Technical Session)

No.of Papers: 6  

6-2

Cycle Optimisation I   (Technical Session)

No.of Papers: 5  

9-13

Vane-Blade HT Interactions I   (Technical Session)

No.of Papers: 6  

10-2

Endwall Film Cooling   (Technical Session)

No.of Papers: 6  

11-3

Rim Sealing   (Technical Session)

No.of Papers: 6  

15-6

Design, Manufacturing and Repair of Combustion Components   (Panel Session)

No.of Papers: 4  

17-1

Heat Exchangers Design & Optimization   (Technical Session)

No.of Papers: 5  

17-2

Rotating Components I: Bearings & Rotordynamics   (Technical Session)

No.of Papers: 4  

21-1

Probabilistic Fatigue and Fracture   (Technical Session)

No.of Papers: 5  

22-4

Rotordynamics I   (Technical Session)

No.of Papers: 6  

23-1

Mistuning of Bladed Disks   (Technical Session)

No.of Papers: 6  

26-5

Flow Control   (Technical Session)

No.of Papers: 6  

27-2

3D Flows   (Technical Session)

No.of Papers: 5  

31-11

Radial Turbines   (Technical Session)

No.of Papers: 6  

33-4

Blade-row Interactions   (Technical Session)

No.of Papers: 5  

1-14

New Engine Concepts II   (Technical Session)

No.of Papers: 4  

3-7

Liquid Biofuel Spray and Mixing   (Technical Session)

No.of Papers: 4  

4-12

Combustion Instabilities Analytical/Numerical II   (Technical Session)

No.of Papers: 3  

4-27

High Hydrogen Combustion   (Technical Session)

No.of Papers: 4  

4-30

Low Emissions Aviation Technology to meet Future Regulatory Requirements   (Panel Session)

No.of Papers: 4  

6-7

Cycle Performance II   (Technical Session)

No.of Papers: 3  

8-1

Gas Turbine Technology   (Technical Session)

No.of Papers: 4  

9-12

Deposition and Roughness Effects II   (Technical Session)

No.of Papers: 3  

10-9

Airfoil Film Cooling   (Technical Session)

No.of Papers: 4  

15-1

Thermal Barrier and Oxidation Resistant Coatings   (Technical Session)

No.of Papers: 4  

16-6

Repair and Modernization of Steam Turbine Equipment used in Marine Applications   (Panel Session)

No.of Papers: 4  

17-4

Portable Microturbines I   (Technical Session)

No.of Papers: 3  

18-1

Operation and Management   (Technical Session)

No.of Papers: 2  

18-10

Asset Management   (Tutorial Session)

No.of Papers: 1  

20-3

Fatigue Life Prediction Methods   (Technical Session)

No.of Papers: 3  

23-4

Blade Rub Phenomena   (Technical Session)

No.of Papers: 1  

26-7

Fundamental Aerodynamics   (Technical Session)

No.of Papers: 3  

27-6

Rotor Tip Flows   (Technical Session)

No.of Papers: 4  

29-2

Lower Dimensional Fidelity Models   (Technical Session)

No.of Papers: 4  

31-5

Centrifugal Compressors II   (Technical Session)

No.of Papers: 4  

33-1

Design Considerations I   (Technical Session)

No.of Papers: 4  

1-5

Gas Turbine Engine Modelling Tutorial   (Tutorial Session)

No.of Papers: 5  

3-4

Clean Coal, CO2 Abatement and IGCC   (Technical Session)

No.of Papers: 5  

4-24

Pollutant Emissions Formation & Control   (Technical Session)

No.of Papers: 5  

4-26

Premixed Flames   (Technical Session)

No.of Papers: 5  

5-7

Active Control of Combustion: Past, Present and Future   (Tutorial Session)

No.of Papers: 2  

6-5

Cycle Performance I   (Technical Session)

No.of Papers: 5  

9-11

Deposition and Roughness Effects I   (Technical Session)

No.of Papers: 5  

10-11

Shaped Hole Film Cooling   (Technical Session)

No.of Papers: 5  

11-6

Oil Systems and Seals   (Technical Session)

No.of Papers: 5  

14-7

Cogeneration Technologies   (Tutorial Session)

No.of Papers: 3  

17-5

Turbochargers & Components I   (Technical Session)

No.of Papers: 4  

17-7

Portable Microturbines II   (Technical Session)

No.of Papers: 4  

18-2

Gas Turbine Diagnostics, Maintenance and Performance   (Technical Session)

No.of Papers: 3  

19-1

System Analyses, Experiments and Inspections   (Technical Session)

No.of Papers: 5  

21-2

Probabilistic Assessment of Blades and Bladed Disks   (Technical Session)

No.of Papers: 5  

22-2

Seals, Impelers and Dampers I   (Technical Session)

No.of Papers: 5  

23-2

Vibration of Bladed Disks I   (Technical Session)

No.of Papers: 5  

24-1

Aerodynamic Interaction and Forced Response Phenomena   (Technical Session)

No.of Papers: 5  

26-10

Tip Leakage Flows I   (Technical Session)

No.of Papers: 5  

27-8

Secondary Flow Losses   (Technical Session)

No.of Papers: 4  

29-4

3D CFD Methods - Compressor and Turbine   (Technical Session)

No.of Papers: 4  

1-16

Jet Noise II -- Experimental   (Technical Session)

No.of Papers: 6  

4-7

Combustion Instabilities Experimental I   (Technical Session)

No.of Papers: 6  

4-25

Pollutant Emissions Testing & Regulations   (Technical Session)

No.of Papers: 6  

5-14

Sensor Technology   (Technical Session)

No.of Papers: 5  

6-9

Humid Cycles   (Technical Session)

No.of Papers: 5  

8-5

Policy Objectives of CCS or Cap & Trade for Fossil Power Plants   (Panel Session)

No.of Papers: 4  

9-14

Vane-Blade HT Interactions II   (Technical Session)

No.of Papers: 6  

11-4

Rotor-Stator Cavities I   (Technical Session)

No.of Papers: 6  

14-4

Thermodynamic Analysis of Cogeneration Systems with Refrigeration   (Technical Session)

No.of Papers: 6  

15-3

Material and Component Performance Assessment   (Technical Session)

No.of Papers: 5  

16-3

Applications & In Service Experience   (Technical Session)

No.of Papers: 6  

18-3

Theoretical and Experimental Analysis of Compression Systems   (Technical Session)

No.of Papers: 5  

18-4

Vibration and Noise   (Technical Session)

No.of Papers: 3  

21-4

Practical Applications of Probabilistic Methods   (Panel Session)

No.of Papers: 5  

22-9

Rotordynamics II   (Technical Session)

No.of Papers: 6  

23-5

Experimental and Numerical Dynamics of Cyclic Structures I   (Technical Session)

No.of Papers: 6  

26-6

Fouling and Rain Ingestion   (Technical Session)

No.of Papers: 4  

27-11

Endwall Flows   (Technical Session)

No.of Papers: 6  

31-2

Centrifugal Compressors III   (Technical Session)

No.of Papers: 4  

32-1

Prof. Georg Gyarmathy Memorial Session: Lifetime Achievements and Future Prespectives in Steam Turbine Development   (Panel Session)

No.of Papers: 4  

33-2

Design Considerations II   (Technical Session)

No.of Papers: 6  

1-1

Inlets, Nozzles and Operability   (Technical Session)

No.of Papers: 4  

4-10

Combustion Instabilities Experimental IV   (Technical Session)

No.of Papers: 3  

4-13

Combustion Modeling I   (Technical Session)

No.of Papers: 3  

5-1

Gas Turbine Diagnostics I   (Technical Session)

No.of Papers: 4  

6-10

Advanced IGCC   (Technical Session)

No.of Papers: 3  

8-2

Emissions of Gas Turbine Based Power Plants   (Technical Session)

No.of Papers: 4  

9-5

Tip Region Cooling   (Technical Session)

No.of Papers: 4  

11-5

Rotor-Stator Cavities II   (Technical Session)

No.of Papers: 3  

14-8

Combustion and Emissions   (Tutorial Session)

No.of Papers: 3  

15-7

Processes for Gas Turbine Component Repair   (Panel Session)

No.of Papers: 4  

17-6

Materials Selection, Properties & Degradation   (Technical Session)

No.of Papers: 3  

17-8

Turbochargers & Components II   (Technical Session)

No.of Papers: 4  

18-7

Aeroderivative and light Industrial Gas Turbine Upgrades and Uprates   (Panel Session)

No.of Papers: 4  

22-6

Air and Foil Bearings II   (Technical Session)

No.of Papers: 4  

24-2

Aeroelastic Phenomena and Computational Methods   (Technical Session)

No.of Papers: 4  

26-11

Tip Leakage Flows II   (Technical Session)

No.of Papers: 4  

27-4

Low Pressure Turbines II   (Technical Session)

No.of Papers: 4  

29-3

Three Dimensional CFD Methods - General   (Technical Session)

No.of Papers: 4  

31-6

Centrifugal Compressors IV   (Technical Session)

No.of Papers: 4  

34-5

Wind Turbine Dynamics and Instrumentation   (Technical Session)

No.of Papers: 3  

1-4

New Testing Facilities/Capabilities for the 21st Century   (Panel Session)

No.of Papers: 4  

2-2

Ceramic Development, Characterization and Application   (Technical Session)

No.of Papers: 5  

3-5

Current Status of Gasification Technology and IGCC with Carbon Capture   (Panel Session)

No.of Papers: 5  

4-15

Combustion Modeling III   (Technical Session)

No.of Papers: 5  

4-16

Combustor Design, Development & Test I   (Technical Session)

No.of Papers: 5  

5-4

Gas Turbine Diagnostics Using Intelligent Methods   (Technical Session)

No.of Papers: 5  

6-16

Innovative Microturbine Cycles   (Technical Session)

No.of Papers: 5  

8-4

Analysis of Gas Turbines and Gas Turbine Based Power Plants   (Technical Session)

No.of Papers: 4  

10-3

Tip & Trailing Edge Film Cooling   (Technical Session)

No.of Papers: 5  

16-5

Maintenance and Monitoring   (Technical Session)

No.of Papers: 5  

17-9

Rotating Components II: Design & Optimization   (Technical Session)

No.of Papers: 3  

17-10

General Interest   (Technical Session)

No.of Papers: 5  

18-5

Degradation in Gas Turbines   (Technical Session)

No.of Papers: 3  

20-1

Component Failure Analysis   (Technical Session)

No.of Papers: 5  

22-3

Bearings I   (Technical Session)

No.of Papers: 5  

23-10

Vibration of Bladed Disks II   (Technical Session)

No.of Papers: 5  

27-5

Leakage Flows   (Technical Session)

No.of Papers: 4  

29-5

Three Dimensional CFD Methods - Turbine   (Technical Session)

No.of Papers: 5  

32-2

The Future of Steam Turbines in the Energy Challenges of the 21st Century   (Panel Session)

No.of Papers: 7  

33-6

Flow Control With an LP-Turbine Focus   (Technical Session)

No.of Papers: 4  

34-9

Wind Turbine Research Programs   (Panel Session)

No.of Papers: 5  

1-3

System Validation, Testing, and Evaluation   (Technical Session)

No.of Papers: 6  

4-9

Combustion Instabilities Experimental III   (Technical Session)

No.of Papers: 6  

4-14

Combustion Modeling II   (Technical Session)

No.of Papers: 6  

4-28

Constant Volume Combustion   (Panel Session)

No.of Papers: 7  

5-5

Topics in Instrumentation   (Technical Session)

No.of Papers: 4  

6-15

Fuel Cell Driven Cycles   (Technical Session)

No.of Papers: 5  

8-6

The Pathway Forward: Future Gas Turbine Products and Their Enabling Technologies   (Panel Session)

No.of Papers: 6  

10-7

Flowfield Measurements In Film Cooling   (Technical Session)

No.of Papers: 5  

11-1

Labyrinth Seals   (Technical Session)

No.of Papers: 6  

13-1

Combustor - Gas Side Aero/Heat Transfer   (Technical Session)

No.of Papers: 4  

14-2

Wet Compression in Gas Turbines   (Technical Session)

No.of Papers: 6  

18-11

Centrifugal Compressor Dynamics   (Tutorial Session)

No.of Papers: 4  

18-13

Wet Gas Compression and Multi-phase Pumping   (Technical Session)

No.of Papers: 3  

22-7

Seals, Impelers and Dampers II   (Technical Session)

No.of Papers: 6  

23-6

Structural Mechanics I   (Technical Session)

No.of Papers: 6  

24-4

Methods for Aeroelastic Calculations and Dimensioning in Turbomachines   (Panel Session)

No.of Papers: 3  

26-4

Endwall Flows   (Technical Session)

No.of Papers: 5  

27-14

Axial Flow Turbines - Key Technologies to Come   (Panel Session)

No.of Papers: 4  

29-10

Adjoint and Inverse Methods   (Technical Session)

No.of Papers: 5  

31-3

Centrifugal Compressors V   (Technical Session)

No.of Papers: 5  

34-11

Engineering Education in Wind Turbine Technology   (Tutorial Session)

No.of Papers: 3  

1-10

Airframe-Propulsion Integration Testing   (Panel Session)

No.of Papers: 5  

2-1

Ceramic Coatings   (Technical Session)

No.of Papers: 4  

3-1

Liquid & Solid Biofuels   (Technical Session)

No.of Papers: 4  

4-1

Novel Combustion Concepts I   (Technical Session)

No.of Papers: 4  

4-4

Atomization & Sprays I   (Technical Session)

No.of Papers: 3  

6-1

CO2 Abatement   (Technical Session)

No.of Papers: 4  

7-1

Education Strategies & Tools I   (Technical Session)

No.of Papers: 4  

8-3

Optimization of Gas Turbine Based Power Plants   (Technical Session)

No.of Papers: 3  

9-1

Internal Cooling   (Technical Session)

No.of Papers: 4  

9-4

Leading and Trailing Edge Cooling   (Technical Session)

No.of Papers: 4  

15-2

Advanced Manufacturing and Repair Technologies   (Technical Session)

No.of Papers: 3  

18-6

Subsea Compression Applications   (Panel Session)

No.of Papers: 4  

23-7

Computational and Experimental Studies of Blade Vibrations   (Technical Session)

No.of Papers: 4  

24-3

Turbomachine Aeroelasticity   (Technical Session)

No.of Papers: 4  

26-12

Tip Leakage Flows III   (Technical Session)

No.of Papers: 4  

27-16

Low Pressure Turbines III   (Technical Session)

No.of Papers: 4  

29-7

Optimization I   (Technical Session)

No.of Papers: 4  

31-8

Centrifugal Compressors VI   (Technical Session)

No.of Papers: 4  

32-6

Exhaust Flows and Design Aspects in Steam Turbines   (Technical Session)

No.of Papers: 4  

34-4

Wind Turbine Systems   (Technical Session)

No.of Papers: 3  

1-6

Jet Noise I -- Computational   (Technical Session)

No.of Papers: 4  

3-8

Carbon Mitigation: Fuel Role in Selecting the Best Option   (Lecture Session)

No.of Papers: 4  

4-2

Novel combustion Concepts II   (Technical Session)

No.of Papers: 3  

4-5

Atomization & Sprays II   (Technical Session)

No.of Papers: 4  

4-29

Part Load Emissions and Transient Response   (Panel Session)

No.of Papers: 4  

5-6

Special Topics in Gas Turbine Diagnostics   (Technical Session)

No.of Papers: 4  

6-11

Low Emission Cycles   (Technical Session)

No.of Papers: 3  

8-8

Implications of CCS or Cap & Trade on Fossil Power Plant Design   (Panel Session)

No.of Papers: 4  

9-6

Impingement Cooling   (Technical Session)

No.of Papers: 4  

10-13

Film Cooling Using Interaction Effects   (Technical Session)

No.of Papers: 4  

14-6

Simulation & Optimization - Gas Turbine and Cogeneration Systems   (Technical Session)

No.of Papers: 4  

15-8

Turbine Component Life Assessment, Prognostics and Life Extension   (Lecture Session)

No.of Papers: 4  

18-8

Offshore and Arctic Compression Application Issues   (Panel Session)

No.of Papers: 5  

21-3

Probabilistic Methods and Design   (Technical Session)

No.of Papers: 2  

27-7

3D Multistage Design Aspects   (Technical Session)

No.of Papers: 2  

29-11

Turbomachinery Modelling and Analysis   (Technical Session)

No.of Papers: 3  

31-9

Centrifugal Compressors VII   (Technical Session)

No.of Papers: 4  

32-7

LP Steam Turbine Design Including Wetness Effects   (Technical Session)

No.of Papers: 5  

33-7

Stall and Surge I   (Technical Session)

No.of Papers: 4  

34-1

Wind Turbine Aero Modeling   (Technical Session)

No.of Papers: 3  

1-15

Ultra High Bypass Propulsion: Ducted Fans and Open Rotors   (Panel Session)

No.of Papers: 6  

4-3

Alternative Fuels   (Technical Session)

No.of Papers: 6  

4-23

Ignition & Auto Ignition   (Technical Session)

No.of Papers: 6  

5-13

High Temperature Instrumentation   (Technical Session)

No.of Papers: 5  

9-8

Rotational Effects on Internal Cooling   (Technical Session)

No.of Papers: 6  

10-5

Analytical Modeling Of Film Cooling   (Technical Session)

No.of Papers: 5  

11-7

Secondary Flow System Design   (Technical Session)

No.of Papers: 5  

12-2

Transition Session   (Technical Session)

No.of Papers: 4  

14-5

Operation & Maintenance -Cogeneration Systems   (Technical Session)

No.of Papers: 6  

15-9

Strategies for Repair Schemes and Technology for Advanced Gas Turbine Component Repairs   (Tutorial Session)

No.of Papers: 4  

18-9

C02 - Carbon Capture and Sequestration (CCS)   (Panel Session)

No.of Papers: 3  

18-12

Modal Testing Fundamentals   (Tutorial Session)

No.of Papers: 1  

21-5

An Introduction to Probabilistic Methods   (Tutorial Session)

No.of Papers: 3  

22-10

Rotordynamics III   (Technical Session)

No.of Papers: 5  

26-3

Design, Analysis and Test II   (Technical Session)

No.of Papers: 4  

27-15

Cooled Turbine Losses   (Technical Session)

No.of Papers: 4  

30-1

Acoustics of Rotating Machinery I   (Technical Session)

No.of Papers: 5  

32-5

Aeromechanic Effects in Steam Turbine   (Technical Session)

No.of Papers: 6  

34-10

Wind Turbine History and Technology Fundamentals   (Tutorial Session)

No.of Papers: 4  

1-8

New Engine Concepts I   (Technical Session)

No.of Papers: 4  

3-10

Gasification Tutorial   (Tutorial Session)

No.of Papers: 2  

4-22

Fuel Injection, Mixing & Vaporization   (Technical Session)

No.of Papers: 4  

4-31

Flashback & Blowout, Flameless Combustion I   (Technical Session)

No.of Papers: 4  

5-12

Control Systems II: Active Control/Distributed Control   (Technical Session)

No.of Papers: 3  

6-12

Novel Cycles   (Technical Session)

No.of Papers: 3  

7-2

Tutorial on the Application, Design, and Analysis of Fluid Film and Magnetic Bearings   (Tutorial Session)

No.of Papers: 2  

9-2

Innovative Internal Cooling   (Technical Session)

No.of Papers: 4  

9-10

Conjugate Heat Transfer   (Technical Session)

No.of Papers: 4  

10-12

Innovative Film Cooling Concepts   (Technical Session)

No.of Papers: 4  

13-3

Combustor Effects on Turbine Components   (Technical Session)

No.of Papers: 4  

15-10

Gas Turbine Materials for the Non-Metallurgist   (Tutorial Session)

No.of Papers: 4  

19-2

Component Analysis   (Technical Session)

No.of Papers: 3  

23-9

Structural Mechanics II   (Technical Session)

No.of Papers: 4  

27-10

Flow Control   (Technical Session)

No.of Papers: 4  

29-9

Optimization II   (Technical Session)

No.of Papers: 4  

33-8

Stall and Surge II   (Technical Session)

No.of Papers: 3  

1-17

Modeling & Simulation II   (Technical Session)

No.of Papers: 3  

3-9

: Best Practices for Engineering Computer Simulation for the Fuels Industry   (Tutorial Session)

No.of Papers: 4  

4-17

Combustor Design, Development & Test II   (Technical Session)

No.of Papers: 3  

4-19

Flashback & Blowout, Flameless Combustion II   (Technical Session)

No.of Papers: 3  

5-16

Active Clearance Measurement in a Hot Zone   (Panel Session)

No.of Papers: 5  

6-14

Techno-Economic Analysis   (Technical Session)

No.of Papers: 3  

9-7

Exp. & CFD Impingement Cooling   (Technical Session)

No.of Papers: 4  

10-4

Leading Edge Film Cooling   (Technical Session)

No.of Papers: 5  

13-2

Combustor Liner Cooling   (Technical Session)

No.of Papers: 4  

15-5

Advanced Materials, NDE & Reliability Improvement   (Technical Session)

No.of Papers: 5  

22-5

Magnetic Bearings   (Technical Session)

No.of Papers: 5  

23-8

Experimental and Numerical Dynamics of Cyclic Structures II   (Technical Session)

No.of Papers: 5  

26-8

Real Geometry Influences   (Technical Session)

No.of Papers: 4  

27-12

Transonic Flows   (Technical Session)

No.of Papers: 3  

28-1

Cross-Module Interactions, Aerodynamics and Performance Considerations in Gas Turbine Engines   (Technical Session)

No.of Papers: 5  

29-8

Optimization III   (Technical Session)

No.of Papers: 5  

32-3

Steam Turbine Design   (Technical Session)

No.of Papers: 5  

33-5

Stall and Surge III   (Technical Session)

No.of Papers: 5  

34-3

Wind Turbine Performance   (Technical Session)

No.of Papers: 4  

4-18

Combustor Diagnostics   (Technical Session)

No.of Papers: 5  

4-20

Combustor Fuel Flexibility   (Technical Session)

No.of Papers: 5  

6-13

Novel Solar Systems   (Technical Session)

No.of Papers: 5  

9-3

Internal Cooling with Ribs   (Technical Session)

No.of Papers: 5  

10-10

Conjugate Studies In Film Cooling   (Technical Session)

No.of Papers: 5  

22-12

Air and foil bearings 3   (Technical Session)

No.of Papers: 2  

23-3

Damping of Turbine Blade Vibrations   (Technical Session)

No.of Papers: 4  

26-2

Design, Analysis and Test III   (Technical Session)

No.of Papers: 3  

27-9

Ducts and Diffusors   (Technical Session)

No.of Papers: 5  

29-6

Unsteady CFD Methods   (Technical Session)

No.of Papers: 4