ASME Turbo Expo 2009: Power for Land, Sea and Air (TE09)

Acceptance notification, technical content, etc.
Volunteer Organizers

Program, events, etc.
Stephanie Sears

Expositions, sponsorships, etc.
Kristin Barranger

Copyright forms
copyright@asme.org

Website support
igtiprogram@asme.org

Conference Schedule	Program Overview \| Program Search

Monday, June 08, 2009

08:30 AM to 09:30 AM

33-1	IGTI Scholar Lecture (Technical Session)	No.of Papers: 1

09:45 AM to 11:45 AM

1-1	General Topics (Technical Session)	No.of Papers: 3
2-1	Ceramic Materials Characterization, Modeling and Demonstration (Technical Session)	No.of Papers: 4
3-1	Liquid Biofuels (Technical Session)	No.of Papers: 4
4-12	Fuel Flexibility (Technical Session)	No.of Papers: 4
4-18	Novel Concepts (Technical Session)	No.of Papers: 4
7-1	Education Strategies & Tools I (Technical Session)	No.of Papers: 4
14-4	Life Prediction of Gas Turbine Components (Joint with Structures and Dynamics Committee) (Technical Session)	No.of Papers: 3
16-1	Heat Exchangers: Materials & Materials Degradation (Technical Session)	No.of Papers: 2
21-1	Gas Bearings (Technical Session)	No.of Papers: 4
26-3	Profiled End Walls (Technical Session)	No.of Papers: 4
27-1	Centrifugal Compressors 1 (Technical Session)	No.of Papers: 3
29-2	Turbine Applications - 1 (Technical Session)	No.of Papers: 4
33-2	Industrial Gas Turbine & Aircraft Engine Technology Award Honorary Lectures (Lecture Session)	No.of Papers: 2

03:15 PM to 05:15 PM

1-4	Engine-Airframe Integration and Modeling and Simulation II (Technical Session)	No.of Papers: 4
3-2	Gasification and Pyrolysis (Technical Session)	No.of Papers: 4
4-3	Combustion Instabilities I (Technical Session)	No.of Papers: 4
4-14	Fundamental Combustion - Experimental (Technical Session)	No.of Papers: 4
6-1	Hybrid Systems I (Technical Session)	No.of Papers: 4
9-11	Endwall Heat Transfer (Technical Session)	No.of Papers: 3
11-1	Design Methods (Technical Session)	No.of Papers: 4
14-10	Engine Health Monitoring and Residual Life Assessment (Panel Session)	No.of Papers: 5
15-2	Design & Development/Applications (Technical Session)	No.of Papers: 4
16-2	Heat Exchangers: Design & Optimization 1 (Technical Session)	No.of Papers: 4
21-2	Seals, impelers and dampers 1 (Technical Session)	No.of Papers: 4
26-5	Overtip Leakage Flows (Technical Session)	No.of Papers: 4
27-2	Centrifugal Compressors 2 (Technical Session)	No.of Papers: 4
29-1	Compressor Applications - 1 (Technical Session)	No.of Papers: 3
30-3	Three Dimensional CFD Methods (Technical Session)	No.of Papers: 4

Tuesday, June 09, 2009

08:00 AM to 10:00 AM

4-6	Combustion Modeling I (Technical Session)	No.of Papers: 3
4-21	Combustion Technology Implications for Gas Turbine Cycles with CO2 Capture (Panel Session)	No.of Papers: 4
5-5	Performance Diagnostics (Technical Session)	No.of Papers: 4
6-11	Novel Systems (Technical Session)	No.of Papers: 4
9-5	Internal Cooling with Impingement (Technical Session)	No.of Papers: 4
9-12	Endwall Film Cooling (Technical Session)	No.of Papers: 3
11-2	Rotor-Rotor Flows (Technical Session)	No.of Papers: 4
13-9	Gas Turbine Performance Testing (Panel Session)	No.of Papers: 3
14-2	Thermal Barrier Coatings- NDE and Life Prediction I (Technical Session)	No.of Papers: 3
16-5	Advanced Cycles (Technical Session)	No.of Papers: 4
17-3	Gas Turbine Optimization and Availability (Tutorial Session)	No.of Papers: 3
17-7	Operation and Management (Technical Session)	No.of Papers: 2
20-1	Mistuning of Bladed Disks I (Technical Session)	No.of Papers: 4
21-11	Seals, impelers and dampers 3 and Magnetic Bearings (Technical Session)	No.of Papers: 4
22-1	Turbomachinery Aeroelasticity I (Technical Session)	No.of Papers: 4
25-1	Design Strategies for Performance Enhancement (Technical Session)	No.of Papers: 4
27-7	Radial Turbines 2 (Technical Session)	No.of Papers: 4
29-10	Compressor Applications - 2 (Technical Session)	No.of Papers: 3
30-2	Lower Dimensional Fidelity Models (Technical Session)	No.of Papers: 4

10:15 AM to 12:15 PM

1-3	Test and Evaluation (Technical Session)	No.of Papers: 3
3-3	Syngas in Gas Turbines (Technical Session)	No.of Papers: 3
4-4	Combustion Instabilities II (Technical Session)	No.of Papers: 4
4-17	Ignition and Autoignition (Technical Session)	No.of Papers: 4
5-3	Gas Path Analysis (Technical Session)	No.of Papers: 3
6-2	Hybrid Systems II (Technical Session)	No.of Papers: 4
8-2	Revolution and Evolution of Stationary Gas Turbines (Panel Session)	No.of Papers: 5
9-13	Trailing Edge Film Cooling (Technical Session)	No.of Papers: 3
9-17	Full Airfoil Cooling (Technical Session)	No.of Papers: 4
11-4	Rotor - Stator Interactions #2 (Technical Session)	No.of Papers: 4
14-13	Thermal Barrier Coatings-NDE and Life Prediction II (Technical Session)	No.of Papers: 3
16-6	Heat Exchangers: Design & Optimization 2 (Technical Session)	No.of Papers: 3
17-5	Gas turbine diagnostics, maintenance and performance (Technical Session)	No.of Papers: 4
20-2	Mistuning of Bladed Disks II (Technical Session)	No.of Papers: 4
21-4	Magnetic Bearings (Technical Session)	No.of Papers: 4
22-4	Turbomachinery Aeroelasticity II (Technical Session)	No.of Papers: 4
25-9	Endwall Flows / Stall Inception (Technical Session)	No.of Papers: 4
27-3	Centrifugal Compressors 3 (Technical Session)	No.of Papers: 4

02:30 PM to 05:00 PM

1-5	Concepts (Technical Session)	No.of Papers: 4
2-3	Ceramic Coatings (Technical Session)	No.of Papers: 5
3-4	Clean Coal and CO2 Abatement (Technical Session)	No.of Papers: 4
4-10	Combustor Design, Development and Test III (Technical Session)	No.of Papers: 5
4-19	Pollutant Emissions (Technical Session)	No.of Papers: 5
5-12	Topics in Instrumentation (Technical Session)	No.of Papers: 4
6-9	Cycle Performance III (Technical Session)	No.of Papers: 5
8-3	Commercializing Advanced Fossil Power Systems with CCS (Panel Session)	No.of Papers: 5
9-2	BOAS and Tip Heat Transfer (Technical Session)	No.of Papers: 5
9-15	Conjugate Heat Transfer (Technical Session)	No.of Papers: 5
11-6	Special Topics (Technical Session)	No.of Papers: 4
13-4	High Performance GT Cycles (Technical Session)	No.of Papers: 3
14-3	Joining and Repair (Technical Session)	No.of Papers: 5
15-1	Marine Gas Turbine Data Collection and Utilization for Diagnostics and Prognostics (Panel Session)	No.of Papers: 4
17-8	Theoretical and experimental analysis of compression systems (Technical Session)	No.of Papers: 5
19-1	Fatigue and Fracture Life Prediction Methods (Technical Session)	No.of Papers: 4
20-7	Structural Mechanics (Technical Session)	No.of Papers: 3
21-3	Rotordynamics 1 (Technical Session)	No.of Papers: 5
24-1	Special Session For Dr. LH Smith (Lecture Session)	No.of Papers: 6

Wednesday, June 10, 2009

08:00 AM to 10:00 AM

1-2	Modeling and Simulation (Technical Session)	No.of Papers: 4
4-15	Fundamental Combustion - Numerical (Technical Session)	No.of Papers: 4
4-25	Novel Concepts II (Technical Session)	No.of Papers: 2
5-7	Diagnostic Methods I (Technical Session)	No.of Papers: 3
6-3	Fuel Cell Driven Cycles (Technical Session)	No.of Papers: 4
8-9	Gas Turbine and Combined Cycle Developments (Technical Session)	No.of Papers: 4
9-6	Internal Cooling with Ribs (Technical Session)	No.of Papers: 4
9-14	Leading Edge Film Cooling (Technical Session)	No.of Papers: 4
13-11	Gas Turbine Power Augmentation Technologies (Tutorial Session)	No.of Papers: 2
14-1	Coatings - Processing and Properties (Technical Session)	No.of Papers: 3
15-4	Testing (Technical Session)	No.of Papers: 3
16-7	Micro-microturbines 1 (Technical Session)	No.of Papers: 4
17-6	Vibration and noise (Technical Session)	No.of Papers: 3
18-1	Static and Dynamic Analysis of Blades and Disks (Technical Session)	No.of Papers: 4
20-3	Experimental and Numerical Dynamics of Cyclic Structures (Technical Session)	No.of Papers: 3
21-12	Rotordynamics 4 (Technical Session)	No.of Papers: 4
25-4	Endwall Flows : Design Considerations (Technical Session)	No.of Papers: 4
26-8	3D Design - Leakages (Technical Session)	No.of Papers: 3
27-4	Centrifugal Compressors 4 (Technical Session)	No.of Papers: 4
31-2	Noise control concepts (Technical Session)	No.of Papers: 4

10:15 AM to 12:15 PM

1-6	Jet Noise (Technical Session)	No.of Papers: 4
3-5	Hydrogen and Non Conventional Fuels (Technical Session)	No.of Papers: 3
4-8	Combustor Design, Development and Test I (Technical Session)	No.of Papers: 4
4-16	High Hydrogen Combustion I (Technical Session)	No.of Papers: 3
5-1	Control Systems (Technical Session)	No.of Papers: 4
6-10	Thermo-Economic Analysis (Technical Session)	No.of Papers: 4
7-2	Education Startegies & Tools II (Technical Session)	No.of Papers: 2
8-5	Users Voice and Experience of Stationary Gas Turbine Technology (Panel Session)	No.of Papers: 4
9-8	Internal Cooling (Technical Session)	No.of Papers: 3
11-5	Seals (Technical Session)	No.of Papers: 4
13-5	Wet Compression/High Fogging for Gas Turbines (Technical Session)	No.of Papers: 3
14-5	Materials and Alloy Development (Technical Session)	No.of Papers: 4
17-4	Degradation in Gas Turbines (Technical Session)	No.of Papers: 4
20-4	Friction Damping in Blade-Disk Attachments (Technical Session)	No.of Papers: 4
21-6	Turbochargers (Technical Session)	No.of Papers: 3
22-3	Forced Response Phenomena (Technical Session)	No.of Papers: 3
23-1	Probabilistic Fatigue & Fracture (Technical Session)	No.of Papers: 4
26-12	Loss mechanisms and Unsteadiness (Technical Session)	No.of Papers: 2
27-5	Centrifugal Compressors 5 (Technical Session)	No.of Papers: 4
30-1	General Interests (Technical Session)	No.of Papers: 4

02:30 PM to 05:00 PM

3-7	Current Status and Outlook of Gasification and IGCC (Panel Session)	No.of Papers: 5
4-5	Combustion Instabilities III (Technical Session)	No.of Papers: 5
4-7	Combustion Modeling II (Technical Session)	No.of Papers: 5
5-13	Engine Test Measurement System Standards (Panel Session)	No.of Papers: 5
6-8	Cycle Performance II (Technical Session)	No.of Papers: 5
8-1	The Pathway Forward: Future Gas Turbine Products and Their Enabling Technologies (Panel Session)	No.of Papers: 6
9-18	Deposition and Roughness (Technical Session)	No.of Papers: 5
11-3	Rotor - Stator Interactions #1 (Technical Session)	No.of Papers: 5
12-2	Flow and Heat Transfer in Combustors (Technical Session)	No.of Papers: 5
13-2	On-Line Washing and Inlet Filteration Systems (Technical Session)	No.of Papers: 3
14-8	Advanced casting technology (Lecture Session)	No.of Papers: 4
16-3	Components, Combustion and Fuels 1 (Technical Session)	No.of Papers: 5
17-2	Subsea Compression Applications (Panel Session)	No.of Papers: 5
17-10	Centrifugal Compressor Dynamics (Tutorial Session)	No.of Papers: 4
18-2	Diverse Topics within GT Component Design and Failure Mechanism Analysis (Technical Session)	No.of Papers: 5
21-5	Bearing dynamics (Technical Session)	No.of Papers: 5
26-2	Low Pressure Turbines (Technical Session)	No.of Papers: 4
27-6	Radial Turbines 1 (Technical Session)	No.of Papers: 5
29-6	Turbine Applications - 3 (Technical Session)	No.of Papers: 4
30-7	Adjoint Methods (Technical Session)	No.of Papers: 5

Thursday, June 11, 2009

08:00 AM to 10:00 AM

4-13	Fuel Injection (Technical Session)	No.of Papers: 4
4-24	High Hydrogen Combustion II (Technical Session)	No.of Papers: 4
5-8	Diagnostic Methods II (Technical Session)	No.of Papers: 3
5-10	Active Clearance Measurement in a Hot Zone (Panel Session)	No.of Papers: 4
6-4	Novel Cycles I (Technical Session)	No.of Papers: 4
8-6	Heat Recovery Steam Generators (HRSG) for Optimization of Gas Turbine Power Plants (Technical Session)	No.of Papers: 3
9-7	Internal Cooling with Pins (Technical Session)	No.of Papers: 4
9-19	Film Cooling CFD & Modelling (Technical Session)	No.of Papers: 4
13-8	Combustion & Emissions (Tutorial Session)	No.of Papers: 3
14-12	Combustion Design and Repair (Panel Session)	No.of Papers: 4
16-8	Components, Combustion and Fuels 2 (Technical Session)	No.of Papers: 4
17-12	API 616 Overview and Proposed Changes (Tutorial Session)	No.of Papers: 0
19-3	Blade Vibration Stress and HCF Prediction Methods (Technical Session)	No.of Papers: 4
20-5	Vibration of Bladed Disks I (Technical Session)	No.of Papers: 4
21-8	Rotordynamics 2 (Technical Session)	No.of Papers: 3
25-6	Flow Control (Technical Session)	No.of Papers: 3
26-10	Trailing Edge Flows (Technical Session)	No.of Papers: 4
28-2	Steam Turbines (Technical Session)	No.of Papers: 3
29-3	Prediction and Analysis Methods (Technical Session)	No.of Papers: 3

10:15 AM to 12:15 PM

4-9	Combustor Design, Development and Test II (Technical Session)	No.of Papers: 4
5-4	Diagnostic Applications and Monitoring Methods (Technical Session)	No.of Papers: 2
5-15	Mechanical Systems Diagnostics & Prognostics (Technical Session)	No.of Papers: 3
6-12	Novel Cycles II (Technical Session)	No.of Papers: 4
8-8	Operational Optimization and Standards for Gas Turbines (Technical Session)	No.of Papers: 4
9-3	Tip Heat Transfer (Technical Session)	No.of Papers: 3
9-10	Internal Cooling using CFD (Technical Session)	No.of Papers: 4
9-20	Shaped Film Cooling (Technical Session)	No.of Papers: 4
13-1	Operation & Maintenance - Cogeneration and Combined Cycle Systems (Technical Session)	No.of Papers: 3
14-9	Control of Replacement Parts - New and Refurbished (Panel Session)	No.of Papers: 4
16-9	Micro-microturbines 2 (Technical Session)	No.of Papers: 3
17-11	Gas Turbine Upgrades, Uprates and New Units (Panel Session)	No.of Papers: 4
19-4	Single Crystal and DS Materials Life Prediction (Joint Session with MMM) (Technical Session)	No.of Papers: 4
20-6	Vibration of Bladed Disks II (Technical Session)	No.of Papers: 4
23-2	Probabilistic Methods Applications (Technical Session)	No.of Papers: 4
25-2	Design & Analysis I (Technical Session)	No.of Papers: 4
29-7	General Aspects (Technical Session)	No.of Papers: 2
30-11	Turbomachinery Modelling and Analysis (Technical Session)	No.of Papers: 4

02:30 PM to 05:00 PM

4-11	Flashback and Blowout (Technical Session)	No.of Papers: 5
4-23	Combustion Modeling III (Technical Session)	No.of Papers: 5
5-9	Success Stories in Condition Based Maintenance (Panel Session)	No.of Papers: 6
6-5	Low Emissions Cycles (Technical Session)	No.of Papers: 4
8-4	Future Combined Cycle Power Plant Technologies (Panel Session)	No.of Papers: 5
9-1	Unsteady and Rotating Effects (Technical Session)	No.of Papers: 5
9-9	Internal Cooling with Rotation (Technical Session)	No.of Papers: 5
9-16	Conjugate Conduction (Technical Session)	No.of Papers: 5
12-1	Combustor Cooling Techniques (Technical Session)	No.of Papers: 5
13-3	Thermo-Economic Analysis of Cogeneration and Combined Cycle Systems (Technical Session)	No.of Papers: 4
14-11	Advanced Repair and Rejuvenation Technologies for IGT Components (Panel Session)	No.of Papers: 5
16-4	Turbochargers and components (Technical Session)	No.of Papers: 5
17-1	Offshore and Arctic Compression Application Issues (Panel Session)	No.of Papers: 5
21-7	Foil bearings (Technical Session)	No.of Papers: 5
25-7	Design and Analysis II (Technical Session)	No.of Papers: 5
26-14	Turbines - General session (Technical Session)	No.of Papers: 5
30-6	Optimization II (Technical Session)	No.of Papers: 5

Friday, June 12, 2009

08:00 AM to 10:00 AM

4-2	Atomization and Sprays (Technical Session)	No.of Papers: 4
4-22	Combustion Instabilities IV (Technical Session)	No.of Papers: 4
6-6	Cycle Optimization (Technical Session)	No.of Papers: 4
9-21	Novel Film Cooling - I (Technical Session)	No.of Papers: 4
9-25	Internal Cooling with Trailing Edge Ejection (Technical Session)	No.of Papers: 3
14-6	Material Behavior and Manufacturing (Technical Session)	No.of Papers: 2
21-9	Rotordynamics 3 (Technical Session)	No.of Papers: 3
25-3	Tip Leakage Flows (Technical Session)	No.of Papers: 4
26-7	Turbine Interducts (Technical Session)	No.of Papers: 3
29-8	Compression System Stability - 1 (Technical Session)	No.of Papers: 3
30-4	Unsteady CFD Methods (Technical Session)	No.of Papers: 4

10:15 AM to 12:15 PM

4-20	Premixed Flames (Technical Session)	No.of Papers: 3
6-7	Cycle Performance I (Technical Session)	No.of Papers: 4
9-22	Novel Film Cooling -II (Technical Session)	No.of Papers: 3
9-24	Internal Cooling Comparisons (Technical Session)	No.of Papers: 4
21-10	Seals, impelers and dampers 2 (Technical Session)	No.of Papers: 4
25-5	Surge and Stall (Technical Session)	No.of Papers: 3
29-5	Turbine Applications - 2 (Technical Session)	No.of Papers: 4
30-10	Inverse Design (Technical Session)	No.of Papers: 3
32-1	Complex Flows and Systems Designs for Engine Systems (Technical Session)	No.of Papers: 2

Sponsored By	Media Sponsor


This site works best with: Internet Explorer 5.0+ • Netscape 7.0+ • Acrobat Reader 5.0+ Note to Firefox users: Firefox is not currently supported by the Conference Toolbox.