Conference Schedule
Program Overview | Program Search
Monday, June 09, 2008
08:00 AM to 10:00 AM
1-2
Aircraft Engine Modeling & Simulation 1: Integration (Technical Session)
No.of Papers: 4
4-8
Ignition and Auto-Ignition (Technical Session)
4-25
Combustion Diagnostics 2 (Technical Session)
6-5
Novel Cycles I (Technical Session)
9-18
Deposition, Roughness, and Manufacturing Effects (Technical Session)
No.of Papers: 3
10-1
Transition I: Transition Fundamentals (Technical Session)
13-1
Advanced Gas Turbine Cycle Analysis (Technical Session)
14-6
Casting and Manufacturing Technologies for Gas Turbine Airfoils (Lecture Session)
No.of Papers: 1
15-3
Design and Development (Technical Session)
20-6
Mistuning Characteristics of Bladed Discs (Technical Session)
25-11
Compressor Stall and Surge I (Technical Session)
29-5
Optimization - I (Technical Session)
02:30 PM to 05:30 PM
1-3
Aircraft Engine Modeling & Simulation 2: Performance (Technical Session)
No.of Papers: 5
2-5
Towards 2020 - Materials Needs for Advanced Gas Turbines of the Future (Panel Session)
4-1
Alternative Liquid Fuels for Gas Turbine Applications (Panel Session)
No.of Papers: 6
4-16
Combustion Instabilities - Model Development 2 (Technical Session)
6-2
Hybrid Systems (Technical Session)
9-16
Internal Heat Transfer: Pin Fins and Dimples (Technical Session)
9-22
Shaped Hole Film Cooling (Technical Session)
10-2
Transition II: Transition in Turbines, Compressors (Technical Session)
14-1
Materials, Material Behavior and Manufacturing (Technical Session)
20-5
Vibrations of Mistuned Blisks (Technical Session)
22-3
Rotordynamics 1 (Technical Session)
24-1
Swirling flow and mixing in turbomachinery duct systems (Technical Session)
25-1
Design, Analysis, and Validation I (Technical Session)
26-1
Tip Leakage Physics and Control (Technical Session)
27-3
Radial Turbomachinery Aerodynamics 1 (Technical Session)
29-2
CFD Methods - I (Technical Session)
31-1
Component Interactions and Performance Sensitivities (Technical Session)
Tuesday, June 10, 2008
1-4
Aircraft Engine Modeling & Simulation 3: General (Technical Session)
4-13
Combustion Instabilities - Acoustics (Technical Session)
4-24
Fundamental Combustion - Numerical (Technical Session)
5-14
High Temperature Instrumentation I (Technical Session)
6-6
Humid Cycles (Technical Session)
8-1
Power Plant Optimization for C02 Capture and Hot-day Performance (Technical Session)
9-6
Conjugate Heat Transfer (Technical Session)
9-19
Film Cooling Analysis (Technical Session)
13-10
Fogging Technology (Panel Session)
14-11
Prognostics and Health Management (Panel Session)
15-2
Tutorial on Gas Turbine Digital Controls (Tutorial Session)
17-2
Compression system modelling (Technical Session)
17-14
Technical issues on the Gas Compression Stations Along the Silk Road Pipeline in China (Panel Session)
20-2
Vibrations of Shrouded Disc Assemblies (Technical Session)
25-12
Compressor Stall and Surge II (Technical Session)
26-6
Intermediate Turbine Ducts (Technical Session)
29-20
Throughflow Applications (Technical Session)
10:15 AM to 12:45 PM
1-1
Aircraft Engine: General (Technical Session)
2-4
Ceramic Coatings (Technical Session)
4-2
High Hydrogen Combustion (Panel Session)
4-4
Novel Combustion Concepts (Technical Session)
5-9
Performance Diagnostics I (Technical Session)
8-9
Carbon Management for Advanced Fossil Power Systems (Panel Session)
9-10
Experimental Methods (Technical Session)
9-28
Endwall Film Cooling I (Technical Session)
13-9
Wet Compression/High Fogging for Gas Turbines (Technical Session)
15-6
Applications & Condition Based Monitoring (Technical Session)
17-5
Gas turbine and compressor testing (Technical Session)
17-9
Subsea Compression Technology (Panel Session)
20-4
Vibration Suppression in Bladed Discs (Technical Session)
22-1
Bearings 1 (Technical Session)
25-16
Tip Clearance Flow Effects II (Technical Session)
26-3
High-Lift Low Pressure Turbines I : Design Implications (Technical Session)
29-3
CFD Methods - II (Technical Session)
4-3
Particulate Emissions (Panel Session)
4-10
Combustor Design, Development and Test 2 (Technical Session)
5-2
Gas Turbine Diagnostics & Instrumentation Tutorial (Tutorial Session)
No.of Papers: 2
5-3
Control Systems I (Technical Session)
6-12
Novel Systems (Technical Session)
8-7
The Pathway Forward: Future Products and Technologies (Panel Session)
9-1
Turbine Tip and Casing Heat Transfer (Technical Session)
9-27
Endwall Film Cooling II (Technical Session)
14-2
Coatings (Technical Session)
17-10
Gas Turbine Uprate & Upgrades (Panel Session)
20-1
Experimental and Numerical Dynamics of Cyclic Structures (Technical Session)
22-10
Rotordynamics 4 (Technical Session)
25-7
Design, Analysis, and Validation V (Technical Session)
26-19
Rotating Rigs (Technical Session)
27-4
Radial Turbomachinery Aerodynamics 2 (Technical Session)
29-18
Multidisciplinary Design (Technical Session)
Wednesday, June 11, 2008
1-6
Distributed Aircraft Engine Controls (Panel Session)
4-5
Chemical Kinetics (Technical Session)
4-17
Combustion Instabilities - Measurement and Control (Technical Session)
5-15
High Temperature Instrumentation II (Technical Session)
6-9
Cycle Optimization (Technical Session)
8-5
Topping Cycle & Bottoming Cycle Performance Analysis (Technical Session)
9-11
Advanced Heat Exchangers (Technical Session)
9-26
Film Cooling CFD (Technical Session)
12-2
Combustor heat transfer analysis (Technical Session)
13-11
Gas Turbine Power Augmentation Technologies (Tutorial Session)
No.of Papers: 0
14-10
Advanced Engine Fleet Experience (Panel Session)
17-13
Compressor dynamics (Tutorial Session)
20-3
Friction Damping of Turbine Blade Vibration (Technical Session)
22-8
Rotordynamics 2 (Technical Session)
25-20
Loss Generation and Reduction Mechanisms (Technical Session)
26-11
Outlet Guide Vanes and Exhaust Diffusers (Technical Session)
28-6
Compressor Applications - 1 (Technical Session)
1-5
Aircraft Engine: Test (Technical Session)
2-6
Ceramic Materials Development, Performance, and Modeling (Technical Session)
4-7
Fuel Injection, Vaporization, and Fuel-Air Mixing (Technical Session)
4-23
Fundamental Combustion - Experimental (Technical Session)
5-10
Performance Diagnostics II (Technical Session)
6-11
Cycle Performance Analysis II (Technical Session)
9-12
Internal Heat Transfer (Technical Session)
9-23
Novel Film Cooling I (Technical Session)
12-1
Combustor - Fuel effects and cooling (Technical Session)
13-4
Gas Turbine Auxiliary Systems (Technical Session)
15-7
Applications / Auxiliary Systems (Technical Session)
17-4
Compressor design (
Monday, June 09, 2008