AGTServices provides full service generator maintenance for all turbine-generators. Services include: High Voltage Bushing manufacturing & rebfurb, stator rewedges, stator end winding dusting correction, field dovetail cracking preventative maintenance, as well as field and stator rewinds.

Alden is an acclaimed leader in solving flow-related engineering and environmental problems. The firm provides physical and computational air, gas, and hydraulic modeling, along with field, environmental and flow meter calibration services. Alden?s extensive facilities, capabilities and years of experience provide cost-effective solutions to fluid flow problems.

Altran Solutions is a comprehensive engineering consulting firm that leverages innovative technologies and industry knowledge to improve power plant performance and reliability. Our team of engineers and technical specialists tackles challenging problems by utilizing an integrated engineering approach that is coupled with the resources of our materials research center. This provides our clients with creative and cost effective improvements to their facilities

Amistco provides engineering, design and manufacture of Separation, Mass Transfer and Wedge Wire Screen Qquipment, to the Oil, Gas, Chemical, Power, and other process Industries worldwide. Products include: filter separators, scrubbers, KO drums, inlet diffusers, liquid/liquid coalesce, trays & packing, strainers, inlet/outlet baskets, support beds, pipe and tank laterals.

ANSTO' s Remaining Life Assessment experts have developed HiTRLCAP software - now used in the majority of Australian power stations for rapid assessment of component damage. HiTRLCAP - High Temperature Remaining Life Cost Assessment Program - is a simulator for power stations that, calculates the damage from unit cycling, then assesses the costs of the chosen cycling regime.

Benetech, Inc. is a leader in comprehensive, performance-based solutions for bulk material handling. Benetech provides innovative systems and technologies, while working with corporate and plant personnel to minimize capital and operating costs. Our experience of over 880 years combined, drives "best practices" and program/processes targeted to deliver safe storage, transfer, and processing of coal.

Our Nebraska Boilers, Natcom Burners, and ERI HRSG's have long been the industry benchmarks for quality and engineering. When they're incorporated into a complete system you are getting the best solution, the best efficiency, and the lowest emissions possible. Single source and single responsibility for every aspect of your project.

Providing "absolutely the best" tube cleaning products and services, Conco stands as the world leader in condenser related products and services for the power generation industry. Our Total Condenser Performance? lineup of services, including condenser tube cleaning, leak detection and eddy current testing can help ensure your condenser remains efficient and reliable during its operating cycle.

CONSPEC Controls, Inc. has been a leader in the design, development and manufacturing of gas detection and monitoring equipment for nearly four decades. CONSPEC's monitoring systems are proven in the harshest environments and are ideal for early fire detection in power plants. Their carbon monoxide monitors allow for reliable and accurate measurement of CO levels in critical locations such as reclaim tunnels, silos and bunkers.

FOMIS is a membership community that connects electric power industry experts. FOMIS can save you hundreds of thousands of dollars in downtime and replacement generation costs. Our members receive 24/7 support from our experienced power station team.

DZ Atlantic provides full-scope, full-service condenser retubing services, as well as helium leak detection, rubber dog bone expansion joint replacement, tube cleaning, and consulting services. In addition to our expert services, Atlantic has been awarded numerous patents for its innovative condenser-related products, processes and equipment.

Dees Fluid Power is an OEM supplier of EHC systems to the ST and CT marketplace. With over 45 years of experience we are your number one choice for system training, troubleshooting, and repairs.

Energy-Tech, published in association with the ASME-Power Division, provides expertise and practical solutions for engineers, plant maintenance & operations personnel, and senior level managers who work in power generation. Each issue offers regular editorial covering turbine maintenance, emissions control systems and technologies, power plant maintenance and systems repair, condition monitoring/predictive maintenance, pumps/ valves/ seals/ actuators, and more. Biomass Products & Technology features the latest products & services available to the biofuels and biopower industries. BPT provides a product-driven format that serves engineers and senior managers who work at facilities that produce energy utilizing biomass as a feedstock as well as suppliers/vendors that provide products or services to these facilities.

EST Group, a business unit of Curtiss-Wright Flow Control Company, is a global manufacturer and designer of tools and systems that greatly simplify the maintenance of shell and tube heat exchangers and the speed-up of in-service inspection of pipe, pipelines, piping systems and pressure vessels.

Fuel Tech, Inc. provides technologies for multi-pollutant emission control, advanced combustion, chemical injection programs and modeling services providing solutions for power plant systems. Products include: NOxOUT/HERT SNCR systems, NOxOUT Cascade(SNCR/SCR), NOxOUT Ultra generate on-site ammonia for SCR, low NOx burners, over-fire air systems, and Targeted in Furnace Injection (TIFI) programs to improve boiler performance.

HPC Technical Services provides TRAINING, DOCUMENTATION SERVICES and ENGINEERING OUTAGE SUPPORT. HPC now offers web-based streaming training videos on various power generation topics as well as developing site-specific, interactive system descriptions, called POWER-DOCS. Power-Docs can be used as an instructional document as well as a powerful troubleshooting tool.

Hydro Dyne is an ASME/National Board Certified code stamp designer, engineer and manufacturer of sophisticated heat transfer equipment for the power generation industry. Turnkey products and services include: new equipment, rebundles, and field service for feedwater heaters, evaporators, reboilers, oil coolers, turbine coolers, bearing coolers, air heat exchangers, condensers, and custom heat exchangers.

KEMA provides business and technical consulting, operational support, measurement, inspection, testing and certification services to 500+ energy and utility clients worldwide. Founded in 1927, KEMA delivers a comprehensive range of integrated services that address each link in the energy chain from generation through the consumer side of the meter.

KJR Associates is a Manufacturers’ Representative Company which focuses on the maintenance, repair, and replacement of power generation equipment. Clients provide the following products and services: FRP pipe, tanks & abrasion resistant pipe; heat exchangers; babbitted bearings; cooling towers, repairs & parts; fiberglass platforms, ladders, grating; generator & brushless exciter inspections, repairs & rewinds.

Lectrodryer designs and manufacture desiccant dryers and purification systems for the removal of humidity and other impurities from air, gases and liquids. We specialize in skid mounted customized drying systems to comply with special especifications and requirements. Our engineers are ready to handle any adsorption process for your exact application.

QAE NDI online inspection of high energy piping, without scaffolds, on running lines, 100% of the line including hanger performance, for all failure mechanisms, at 30%, and 10% of standard NDE cost for baseline and repetitive inspections. Equipment dedicated to the line. Ideal for long-term monitoring programs. Over 85 lines installed.

Martin Engineering makes bulk materials handling cleaner, safer, and more productive. Solutions range from conveyor architecture and engineered chutes to belt cleaners and air cannon systems. Services include installation, maintenance, silo cleaning, and asset management. All systems and services are covered by an Absolutely, Positively, No Excuses Guarantee.

MI Research offers a unique CFD package, FlowDesigner7. FlowDesigner7 makes modeling and meshing simple so that you can concentrate on thermal design itself. Sure conversion and "Library" function ensure comparison of various designs easy and quick! Analyzes temperature, fluid flow, humidity, CO2, etc. Contacted analysis also available.

Leading independent manufacturer of generator windings. Engineering design, repair and retrofit services for high-voltage generators and other rotating electrical equipment. Manufacturing sites in Columbus, Ohio, and Brownsville, Texas, and fully-equipped service facility, including high-speed balancing and electrical tests, in Columbus, Ohio. Field services for on-site rewinds.

"The power industry's only one-stop shop" for all heat exchanger: cleaning, testing, refurbishing, re-tubing, plugging, epoxy coatings, reverse engineering, and new/replacement custom manufactured units. Our patented and exclusive shell-side cleaning process cleans both round and finned coolers completely to the center.

There is no greater calling or opportunity for a fluid management company than today's challenge - helping customers protect people, the environment and our natural resources. Together we are implementing technologies that purify and conserve water, consume less energy, make alternative energy sources possible and practical, advance medicine and minimize emissions and waste. Our collective efforts are enabling a greener more sustainable future.

Pilgrim hydraulic coupling bolts are a quick-release bolting system used on nuclear and fossil steam turbine generators.

Plastocor specializes in the turnkey application of protective coatings to main surface condensers and BOP heat exchangers; tubesheets, full length ID tube coatings, waterboxes, circulating/service water piping and condenser flange sealing. Extended warranty provided.

Plymouth is the premier tube manufacturer for the power generation and water processing industries making austenitic, ferritic, and superferritic stainless steels sized from ½ to 2" OD. Plymouth tube proudly offers SEA-CURE^® condenser tubing and XtraLowStress^® feedwater heater tubing. Visit our exhibit to see how Plymouth Tube can be your power generation tubing solution specialist.

Proton Energy Systems is an ISO 9001:2008 registered company that designs,develops, and manufactures world-class onsite hydrogen generation and control products for worldwide markets; HOGEN® hydrogen generation systems and StableFlow^TM hydrogen control systems combine to provide the most cost-effective hydrogen cooling and efficiency optimization solution available for hydrogen-cooled electric generators at power plants.

Rentech designs and manufactures high quality custom boilers in a variety of categories, including: fired packaged boilers, waste heat boilers, heat recovery steam generators, specialty boilers, and emissions control systems.

Retubeco provides specialized high production retubing tooling packages, technical assistance, specifications, planning, and turnkey services to the level necessary to support your particular condenser or heat exchanger retubing/repair project.

Sargent & Lundy provides comprehensive consulting, engineering, design, and analysis for electric power generation and poser delivery projects worldwide. With a large, highly experienced staff solely dedicated to the energy business, we have the ability and know-how to take on the smallest tasks as well as the largest projects.

Scientech is a leading supplier of equipment, parts, software, and information services to the worldwide power generation industry. The foundation of all Scientech products and services is to enhance the safety, longevity, and efficiency of power plants.

Siemens services to support your plant performance and profit
Siemens is dedicated to supporting customers' operating power plant needs through:

• Innovative technology solutions that can help you improve your plant's performance
• Fast, professional help and preventive maintenance to help you run your plant more profitability
• Tailor made service agreements that can help support your long-term operating goals
• Customized programs to help enhance your plant's employee knowledge and skills.

SWAN Analytical Instruments develops instruments for online water analysis, setting the standard for power-generating and semiconductor industries worldwide. SWAN guarantees top level quality due to the fact that all manufacturing is done in house and a rigid quality control is performed on every instrument before it leaves the plant.

Valtimet is a world leader in the production of welded titanium, austenitic & ferritic stainless steel, ValBrite^® super stainless, Fine Fin^® extended surface tubing and other tube materials for steam surface condensers, feedwater heaters, MSR's and BOP heat transfer equipment for Power Generation, Chemical Process, Desalination, LNG and other specialized industries. Valtimet has seven plants in the following counties: USA, France, China, Korea & India.

Vooner FloGard provides a variety of liquid ring vacuum pumps for the power generation industry, including two-stage cast iron vacuum pumps for condenser gas removal, 316 stainless steel pumps for fly ash conveying and geothermal power plants. Other applications include FGD filter gypsum dewatering, water box priming and vacuum deaeration.