WKSP-1-3

W3: Sustainable Manufacturing: Information Modeling for Sustainable Manufacturing Standards, Methodologies and Practices   (Technical Session)

No.of Papers: 0  

WKSP-1-5

W5: Precision Structronic and Mechatronic Devices with Smart Materials   (Technical Session)

No.of Papers: 0  

WKSP-1-9

W9: Passive Nonlinear Targeted Energy Transfer in Coupled Oscillators   (Technical Session)

No.of Papers: 0  

WKSP-1-1

W1: Non-Contact Vibration Characterization   (Technical Session)

No.of Papers: 0  

WKSP-1-2

W2: Mechanical Engineering Design Knowledge Modeling   (Technical Session)

No.of Papers: 0  

WKSP-1-4

W4: Teraflop Parallel Computing on a Budget: Applications of Graphics Processing Unit (GPU) Computing in Mechanical Engineering   (Technical Session)

No.of Papers: 0  

WKSP-1-6

W6: LEGO Mindstorms with MATLAB and Simulink for Teaching Controls, Robotics and Mechatronics   (Technical Session)

No.of Papers: 0  

WKSP-1-7

W7: Navigating and Leading Change   (Technical Session)

No.of Papers: 0  

WKSP-1-8

W8: NSF Bio-Inspired Design Workshop: Charting a Course for Computer-Aided Bio-inspired Design Research   (Technical Session)

No.of Papers: 0  

WKSP-1-10

W10: Creative Design of Parallel Mechanisms   (Technical Session)

No.of Papers: 0  

COMM-1-1

Design Engineering Division EC   (Committee Meeting)

No.of Papers: 0  

COMM-1-2

Systems & Design Group w/ DED   (Committee Meeting)

No.of Papers: 0  

COMM-1-3

Technical Committees Leadership Training   (Committee Meeting)

No.of Papers: 0  

MESA-1-1

Fractional Dynamics and Fractional Differential Equations   (Technical Session)

No.of Papers: 5  

MESA-2-1

Rotary-Wing UAVs   (Technical Session)

No.of Papers: 5  

MSNDC-1-1

Algorithms and Integration Methods   (Technical Session)

No.of Papers: 5  

MSNDC-2-1

Contact and Interface Dynamics I   (Technical Session)

No.of Papers: 5  

MSNDC-3-1

Control and Optimization I   (Technical Session)

No.of Papers: 5  

MSNDC-4-1

Macro- and Microscale Device and System Design   (Technical Session)

No.of Papers: 5  

MESA-3-1

Cyber-Physical and Cooperative Systems   (Technical Session)

No.of Papers: 3  

CIE-2-1

Frameworks, Representations and Information Modeling   (Technical Session)

No.of Papers: 5  

CIE-4-1

VES Session 1   (Technical Session)

No.of Papers: 4  

MESA-4-1

Mechatronics & Embedded Systems Applications   (Technical Session)

No.of Papers: 4  

PTG-1-1

Gear System Design and Analysis I   (Technical Session)

No.of Papers: 5  

DTM-1-1

Design representations and formalisms   (Technical Session)

No.of Papers: 5  

MECH-2-1

Cable-Driven Systems   (Technical Session)

No.of Papers: 5  

MECH-3-1

Surgical & Diagnostic Applications   (Technical Session)

No.of Papers: 5  

MECH-1-1

Legged Locomotion   (Technical Session)

No.of Papers: 4  

VIB-1-1

Vibration Monitoring   (Technical Session)

No.of Papers: 4  

VIB-2-1

Fractional Dynamics and Control   (Technical Session)

No.of Papers: 5  

VIB-3-1

Electromagnetic Energy Harvesting   (Technical Session)

No.of Papers: 5  

VIB-4-1

Modeling, Analysis, and Simulation   (Technical Session)

No.of Papers: 5  

CIE-5-1

AMS GPU-HPC Session 1   (Technical Session)

No.of Papers: 4  

CIE-1-1

Full-field Strain Measurement   (Technical Session)

No.of Papers: 4  

MNS-1-1

Micro and Nano-Manufacturing   (Technical Session)

No.of Papers: 5  

DFMLC-1-1

Theoretical Foundations for Design and Manufacturing Integration   (Technical Session)

No.of Papers: 4  

DAC-2-1

Application-Tailored Optimization Methods   (Technical Session)

No.of Papers: 5  

DAC-1-1

Design Optimization Algorithms   (Technical Session)

No.of Papers: 5  

CIE-3-1

SEIKM Design Informatics I   (Technical Session)

No.of Papers: 5  

CIE-2-2

Geometric Modeling Techniques   (Technical Session)

No.of Papers: 4  

PTG-2-1

Surface Engineering and Tribology   (Technical Session)

No.of Papers: 4  

PTG-3-1

Plastic Gears   (Technical Session)

No.of Papers: 4  

DTM-2-1

Function Based Methods   (Technical Session)

No.of Papers: 4  

CIE-5-2

AMS GPU-HPC Session 2   (Technical Session)

No.of Papers: 3  

CIE-1-2

Material Characterization   (Technical Session)

No.of Papers: 4  

CIE-6-1

AMS MSB Session 1   (Technical Session)

No.of Papers: 3  

MNS-3-1

Nonlinear mechanics, dynamics, and control in Atomic Force Microscopy I   (Technical Session)

No.of Papers: 3  

DEC-1-1

Building Bridges for Engineering Education – Partnership with Industry   (Panel Session)

No.of Papers: 0  

MNS-2-1

Micro and Nano Mechanisms and Robotics   (Technical Session)

No.of Papers: 4  

CIE-3-2

SEIKM Design Informatics II   (Technical Session)

No.of Papers: 4  

AVTT-1-1

Keynote I   (Keynote Session)

No.of Papers: 1  

VIB-5-1

Den Hartog Award Keynote Session   (Keynote Session)

No.of Papers: 1  

MESA-5-1

Keynotes I   (Keynote Session)

No.of Papers: 1  

DFMLC-3-1

Panel: Entertainment engineering: Realizing “Entertaining” Ideas   (Panel Session)

No.of Papers: 0  

MECH-4-1

Keynote Session - Jointly sponsored by MECH, DFMLC and DAC   (Keynote Session)

No.of Papers: 1  

MSNDC-5-1

Student paper competition   (Technical Session)

No.of Papers: 0  

DAC-3-1

Keynote Session - Jointly sponsored by MECH, DFMLC and DAC   (Keynote Session)

No.of Papers: 0  

DFMLC-2-1

Keynote Session - Jointly sponsored by MECH, DFMLC and DAC   (Keynote Session)

No.of Papers: 0  

COMM-4-1

Advanced Modeling & Simulation (AMS)   (Committee Meeting)

No.of Papers: 0  

COMM-4-2

Computer-Aided Product and Process Development (CAPPD)   (Committee Meeting)

No.of Papers: 0  

COMM-4-3

Systems Engineering, Info. & Knowledge Management (SEIKMD)   (Committee Meeting)

No.of Papers: 0  

COMM-4-4

Virtual Environments and Systems (VES)   (Committee Meeting)

No.of Papers: 0  

COMM-5-1

Jointed Structures Research Committee   (Committee Meeting)

No.of Papers: 0  

MESA-1-2

Mathematical Fundamentals of Fractional Calculus   (Technical Session)

No.of Papers: 4  

MESA-2-2

Multi-UAV Systems   (Technical Session)

No.of Papers: 5  

MSNDC-1-2

Methods for Constrained and Discontinuous Dynamics   (Technical Session)

No.of Papers: 5  

MSNDC-2-2

Contact and Interface Dynamics II   (Technical Session)

No.of Papers: 5  

MSNDC-3-2

Control and Optimization II   (Technical Session)

No.of Papers: 4  

MESA-6-1

Mechatronic Control & Electrical Vehicular Systems   (Technical Session)

No.of Papers: 5  

CIE-2-3

CAD Applications and Parametric Modeling   (Technical Session)

No.of Papers: 5  

CIE-4-2

VES Session 2   (Technical Session)

No.of Papers: 5  

PTG-1-2

Gear System Design and Analysis II   (Technical Session)

No.of Papers: 4  

PTG-4-1

Gear System Dynamics and Noise I   (Technical Session)

No.of Papers: 5  

DTM-3-1

User centric design   (Technical Session)

No.of Papers: 5  

AVTT-2-1

Advances in Multibody Systems Modeling and Validation for Vehicle Dynamics Applications   (Technical Session)

No.of Papers: 5  

MECH-2-2

Tensegrity & Cable-Driven Systems   (Technical Session)

No.of Papers: 5  

MECH-3-2

Assistive and Rehabilitation Applications   (Technical Session)

No.of Papers: 5  

VIB-1-2

Advanced Sensors, Systems & Signal Processing   (Technical Session)

No.of Papers: 5  

VIB-2-2

Dynamical systems and Syncrhonization   (Technical Session)

No.of Papers: 5  

VIB-3-2

Piezoelectric Energy Harvesting   (Technical Session)

No.of Papers: 5  

CIE-7-1

AMS IPSE Session 1   (Technical Session)

No.of Papers: 4  

CIE-8-1

Advances in the Engineering of Complex and Large-Scale Systems   (Technical Session)

No.of Papers: 5  

MNS-4-1

Experimental Investigations   (Technical Session)

No.of Papers: 5  

DFMLC-4-1

Through Life Costing of Products and Services   (Technical Session)

No.of Papers: 4  

DAC-4-1

Celebration of K.K. Choi's 65th Birthday   (Technical Session)

No.of Papers: 5  

DAC-5-1

Mass Customization and Consumer Preferences   (Technical Session)

No.of Papers: 5  

RSAFP-1-1

RSAFP Considerations in Design Process and Computer-Based Analysis for RSAFP   (Technical Session)

No.of Papers: 5  

MECH-5-1

Student Mechanism Design Competition - Undergraduate   (Technical Session)

No.of Papers: 0  

DAC-6-1

Panel: ASME Journals' Chief Editors   (Panel Session)

No.of Papers: 6  

MESA-1-3

Fractional Order Controls – Design and Tuning Methods   (Technical Session)

No.of Papers: 5  

MESA-2-3

Advanced navigation and flight control techniques   (Technical Session)

No.of Papers: 5  

MSNDC-1-3

Novel Methods and Nonlinear Dynamics   (Technical Session)

No.of Papers: 5  

MSNDC-2-3

Contact and Interface Dynamics III   (Technical Session)

No.of Papers: 4  

MSNDC-3-3

Control and Optimization III   (Technical Session)

No.of Papers: 6  

MESA-7-1

Diagnosis and Monitoring in Mechatronics Systems   (Technical Session)

No.of Papers: 5  

CIE-2-4

Tolerancing and Process Planning   (Technical Session)

No.of Papers: 5  

CIE-4-3

VES Session 3   (Technical Session)

No.of Papers: 6  

PTG-6-1

Gear Strength and Durability   (Technical Session)

No.of Papers: 5  

PTG-5-1

Power Loss in Gear Systems   (Technical Session)

No.of Papers: 4  

DTM-4-1

Product family and architecture design   (Technical Session)

No.of Papers: 4  

AVTT-3-1

Advances in Methods for Vehicle Systems Design and Tire Modeling I   (Technical Session)

No.of Papers: 6  

MECH-1-2

Air and Water Locomotion   (Technical Session)

No.of Papers: 5  

MECH-6-1

Dynamics and Control   (Technical Session)

No.of Papers: 6  

VIB-1-3

Acoustics, Prediction & Diagnosis   (Technical Session)

No.of Papers: 3  

VIB-3-3

Nonlinear Energy Harvesting   (Technical Session)

No.of Papers: 5  

VIB-4-2

Modal Analysis and Testing   (Technical Session)

No.of Papers: 4  

CIE-7-2

AMS IPSE Session 2   (Technical Session)

No.of Papers: 5  

MNS-4-2

Modeling Techniques   (Technical Session)

No.of Papers: 4  

MNS-3-2

Nonlinear mechanics, dynamics, and control in Atomic Force Microscopy II   (Technical Session)

No.of Papers: 5  

DEC-2-1

Best Practices and Lessons Learned in Design Education   (Technical Session)

No.of Papers: 3  

DFMLC-6-1

Integrated Product Design and Process Development Processes I   (Technical Session)

No.of Papers: 4  

DFMLC-5-1

Sustainable Design   (Technical Session)

No.of Papers: 5  

DAC-4-2

Celebration of K.K. Choi's 65th Birthday   (Technical Session)

No.of Papers: 5  

DAC-7-1

Multiscale Mechanics and Design Optimization of Cellular Materials   (Technical Session)

No.of Papers: 5  

MECH-5-2

Student Mechanism Design Competition - Graduate   (Technical Session)

No.of Papers: 0  

MESA-1-4

Applied Fractional Calculus in Materials and Mechanics   (Technical Session)

No.of Papers: 4  

MESA-2-4

Small UAV systems and applications   (Technical Session)

No.of Papers: 4  

MSNDC-6-1

Industry Panel   (Panel Session)

No.of Papers: 4  

MESA-9-1

Bio-Mechatronics I   (Technical Session)

No.of Papers: 4  

CIE-2-5

Models and Metamodels under Uncertainty   (Technical Session)

No.of Papers: 5  

CIE-4-4

VES Session 4   (Technical Session)

No.of Papers: 5  

MESA-8-1

Virtual Prototyping in Mechatronics   (Technical Session)

No.of Papers: 4  

PTG-1-3

Gear System Design and Analysis III   (Technical Session)

No.of Papers: 5  

PTG-7-1

Novel Transmission Concepts and Control   (Technical Session)

No.of Papers: 4  

DTM-5-1

Quantitative assessment methods   (Technical Session)

No.of Papers: 5  

MECH-1-3

Mobility   (Technical Session)

No.of Papers: 5  

MECH-6-2

Grasping and Manipulation   (Technical Session)

No.of Papers: 4  

MECH-7-1

Mechanisms and Robotics Education   (Technical Session)

No.of Papers: 5  

VIB-4-3

Vibration-based Structural Damage Detection   (Technical Session)

No.of Papers: 3  

VIB-7-1

Dynamics and Control of Bio-Systems   (Technical Session)

No.of Papers: 4  

VIB-6-1

Vibration and Control of Distributed Structural Systems I   (Technical Session)

No.of Papers: 5  

CIE-9-1

CAPPD: Emotional Engineering I   (Technical Session)

No.of Papers: 4  

CIE-10-1

Systems Engineering   (Technical Session)

No.of Papers: 4  

MNS-5-1

BIO MEMS/NEMS-I   (Technical Session)

No.of Papers: 4  

DEC-2-2

Best Practices and Lessons Learned in Design Education   (Technical Session)

No.of Papers: 4  

DFMLC-6-2

Integrated Product Design and Process Development Processes II   (Technical Session)

No.of Papers: 5  

DFMLC-7-1

Life Cycle Decision Making I   (Technical Session)

No.of Papers: 5  

DAC-9-1

Design for Market Systems   (Technical Session)

No.of Papers: 4  

RSAFP-2-1

Stress Analysis   (Technical Session)

No.of Papers: 5  

MECH-5-3

Student Robot Design Competition - Undergraduate   (Technical Session)

No.of Papers: 0  

DAC-8-1

Decision Making in Engineering Design   (Technical Session)

No.of Papers: 5  

MSNDC-7-1

Lyapunov Award Keynote Session   (Keynote Session)

No.of Papers: 1  

DTM-6-1

Creativity Methods and Studies   (Technical Session)

No.of Papers: 4  

MECH-8-1

Theory: Metrics and Design Tools   (Technical Session)

No.of Papers: 4  

MECH-1-4

Crawling and Worm Robots   (Technical Session)

No.of Papers: 4  

MECH-9-1

Spatial Mechanisms   (Technical Session)

No.of Papers: 4  

CIE-9-2

CAPPD: Emotional Engineering II   (Technical Session)

No.of Papers: 4  

MNS-5-2

BIO MEMS/NEMS-II   (Technical Session)

No.of Papers: 4  

MNS-3-3

Nonlinear mechanics, dynamics, and control in Atomic Force Microscopy III   (Technical Session)

No.of Papers: 4  

DEC-3-1

Attracting Future Engineers – Best Practices and Lessons Learned   (Panel Session)

No.of Papers: 0  

DAC-10-1

Applying Large Scale Demand Models in Design Optimization   (Technical Session)

No.of Papers: 3  

DAC-12-1

Design and Optimization of Sustainable Energy Systems   (Technical Session)

No.of Papers: 4  

DAC-11-1

Design for the Developing World   (Technical Session)

No.of Papers: 4  

MECH-5-4

Student Robot Design Competition - Graduate   (Technical Session)

No.of Papers: 0  

CIE-11-1

Panel I   (Panel Session)

No.of Papers: 0  

AVTT-1-2

Keynote II   (Keynote Session)

No.of Papers: 1  

VIB-5-2

Myklestad Award Keynote Session   (Keynote Session)

No.of Papers: 1  

MESA-5-2

Keynotes II   (Keynote Session)

No.of Papers: 1  

DAC-13-1

Environmental Policy in Vehicle Design: Panel Session Jointly Sponsored by DAC and AVTT   (Panel Session)

No.of Papers: 4  

PTG-8-1

ASME International Power Transmission and Gearing Conference Buckingham Lecture   (Keynote Session)

No.of Papers: 1  

DFMLC-3-2

Panel: Entertainment engineering: Technical Implementations   (Panel Session)

No.of Papers: 0  

AVTT-4-1

Environmental Policy in Vehicle Design: Panel Session Jointly Sponsored by DAC and AVTT   (Panel Session)

No.of Papers: 0  

MESA-1-5

Fractional Order Controls – Applications   (Technical Session)

No.of Papers: 5  

MSNDC-8-1

Dynamical Systems with Time-Variability, Delay, or Discontinuities I   (Technical Session)

No.of Papers: 5  

MSNDC-10-1

Dynamics of Vehicles I   (Technical Session)

No.of Papers: 5  

MSNDC-9-1

Flexible Multibody Dynamics I   (Technical Session)

No.of Papers: 5  

MESA-10-1

Infrastructure for Embedded Systems   (Technical Session)

No.of Papers: 5  

MESA-9-2

Bio-Mechatronics II   (Technical Session)

No.of Papers: 5  

CIE-12-1

AMS Session 1 Modeling   (Technical Session)

No.of Papers: 4  

PTG-4-2

Gear System Dynamics and Noise II   (Technical Session)

No.of Papers: 5  

DTM-7-1

Design behavior and analogical design   (Technical Session)

No.of Papers: 5  

AVTT-5-1

Advances in Alternative Propulsion Systems and Non-conventional, Energy Efficient Vehicles   (Technical Session)

No.of Papers: 4  

MECH-8-2

Applications: Material and Geometric Factors   (Technical Session)

No.of Papers: 5  

MECH-9-2

Planar Synthesis I   (Technical Session)

No.of Papers: 5  

MECH-6-3

Legged Locomotion   (Technical Session)

No.of Papers: 5  

VIB-8-1

Global Nonlinear Dynamics - I   (Technical Session)

No.of Papers: 5  

VIB-9-1

Rotor Dynamics and Control I - Magnetic Bearings   (Technical Session)

No.of Papers: 5  

VIB-6-2

Vibration and Control of Distributed Structural Systems II   (Technical Session)

No.of Papers: 5  

CIE-13-1

Knowledge Capture, Reuse, and Management   (Technical Session)

No.of Papers: 4  

MNS-6-1

Dynamics of MEMS and NEMS I: Symposium Keynote and Emerging Topics   (Technical Session)

No.of Papers: 4  

DEC-4-1

Experiential Learning and New Pedagogy for Engineering Education   (Technical Session)

No.of Papers: 4  

DFMLC-8-1

Design for Mass Customization, Design for Service, Design for Layered Manufacturing & Design I   (Technical Session)

No.of Papers: 5  

DAC-15-1

Metamodel-based Design Optimization (MBDO)   (Technical Session)

No.of Papers: 5  

DAC-16-1

Simulation-based Design Under Uncertainty   (Technical Session)

No.of Papers: 5  

DAC-14-1

Multidisciplinary Design Optimization (MDO)   (Technical Session)

No.of Papers: 3  

CIE-11-2

Panel II   (Panel Session)

No.of Papers: 0  

MSNDC-11-1

Rapid-fire poster session I   (Technical Session)

No.of Papers: 7  

COMM-1-4

DED General Meeting   (Committee Meeting)

No.of Papers: 0  

MESA-1-6

Initialization Issues in Applied Fractional Calculus   (Technical Session)

No.of Papers: 5  

MSNDC-8-2

Dynamical Systems with Time-Variability, Delay, or Discontinuities II   (Technical Session)

No.of Papers: 5  

MSNDC-9-2

Flexible Multibody Dynamics II   (Technical Session)

No.of Papers: 5  

MESA-10-2

Theory and Algorithms for Embedded Systems   (Technical Session)

No.of Papers: 4  

CIE-12-2

AMS Session 2 CFD   (Technical Session)

No.of Papers: 3  

PTG-9-1

Wind Turbine Gears   (Technical Session)

No.of Papers: 4  

DTM-8-1

Uncertainty and risk in design   (Technical Session)

No.of Papers: 5  

AVTT-3-2

Advances in Methods for Vehicle Systems Design and Tire Modeling II   (Technical Session)

No.of Papers: 5  

MECH-8-3

Synthesis Methods   (Technical Session)

No.of Papers: 5  

MECH-10-1

Translational Manipulators   (Technical Session)

No.of Papers: 6  

MECH-9-3

Planar Synthesis II   (Technical Session)

No.of Papers: 5  

VIB-8-2

Global Nonlinear Dynamics - II   (Technical Session)

No.of Papers: 3  

VIB-9-2

Rotor Dynamics and Control II - Nonlinear Dynamics   (Technical Session)

No.of Papers: 5  

VIB-11-1

Vibration absorption and mitigation   (Technical Session)

No.of Papers: 5  

VIB-10-1

Nonlinear Dynamics of Continuous Systems I   (Technical Session)

No.of Papers: 4  

CIE-14-1

AMS CMA Session 1   (Technical Session)

No.of Papers: 5  

CIE-15-1

Panel   (Panel Session)

No.of Papers: 4  

CIE-16-1

Product Lifecycle Management   (Technical Session)

No.of Papers: 5  

MNS-6-2

Nonlinear Dynamics of MEMS and NEMS I   (Technical Session)

No.of Papers: 5  

DEC-5-1

Teaching Design for Sustainability   (Technical Session)

No.of Papers: 4  

DFMLC-8-2

Design for Mass Customization, Design for Service, Design for Layered Manufacturing & Design II   (Technical Session)

No.of Papers: 5  

DAC-17-1

Geometric Modeling and Algorithms for Design and Manufacturing   (Technical Session)

No.of Papers: 5  

RSAFP-3-1

Failure Analyses and Modeling   (Technical Session)

No.of Papers: 5  

DAC-18-1

Design and Manufacturing of Systems   (Technical Session)

No.of Papers: 4  

MSNDC-11-2

Rapid-fire poster session II   (Technical Session)

No.of Papers: 6  

COMM-2-3

Design Education (DEC)   (Committee Meeting)

No.of Papers: 0  

COMM-2-1

Advanced Vehicle and Tire Technologies (AVTT)   (Committee Meeting)

No.of Papers: 0  

COMM-2-4

Design for Manufacturing and the Life Cycle (DFMLC)   (Committee Meeting)

No.of Papers: 0  

COMM-2-8

Mechatronic and Embedded Systems and Applications (MESA)   (Committee Meeting)

No.of Papers: 0  

COMM-2-2

Design Automation (DAC)   (Committee Meeting)

No.of Papers: 0  

COMM-2-5

Design Theory and Methodology (DTM)   (Committee Meeting)

No.of Papers: 0  

COMM-2-9

MESA FDTA Symposium Team Meeting (MESA-FDTA)   (Committee Meeting)

No.of Papers: 0  

COMM-2-10

Multibody Systems and Nonlinear Dynamics (MSND)   (Committee Meeting)

No.of Papers: 0  

COMM-2-7

Micro & Nano Systems (MNS)   (Committee Meeting)

No.of Papers: 0  

COMM-2-6

Mechanisms and Robotics (MECH)   (Committee Meeting)

No.of Papers: 0  

COMM-3-1

CIE Division EC Meeting   (Committee Meeting)

No.of Papers: 0  

COMM-2-11

Vibration and Sound (TCVS)   (Committee Meeting)

No.of Papers: 0  

MESA-1-7

Fractional Order Signal Processing Techniques and Applications   (Technical Session)

No.of Papers: 5  

MSNDC-8-3

Dynamical Systems with Time-Variability, Delay, or Discontinuities III   (Technical Session)

No.of Papers: 4  

MSNDC-10-2

Dynamics of Vehicles II   (Technical Session)

No.of Papers: 5  

MSNDC-12-1

Phenomena, Applications, and Methods   (Technical Session)

No.of Papers: 5  

MSNDC-9-3

Flexible Multibody Dynamics III   (Technical Session)

No.of Papers: 5  

MESA-11-1

Autonomous Systems   (Technical Session)

No.of Papers: 5  

MESA-12-1

Robotics & Mobile Machines I   (Technical Session)

No.of Papers: 4  

PTG-1-4

Gear System Design and Analysis IV   (Technical Session)

No.of Papers: 5  

DTM-9-1

Complexity and adaptability in design   (Technical Session)

No.of Papers: 5  

MECH-8-4

Synthesis Tools for Special Purpose Applications   (Technical Session)

No.of Papers: 5  

MECH-10-2

Kinematic Analysis   (Technical Session)

No.of Papers: 4  

MECH-9-4

Robot Mechanisms   (Technical Session)

No.of Papers: 5  

VIB-9-3

Rotor Dynamics and Control III - Analysis   (Technical Session)

No.of Papers: 4  

VIB-12-1

Vibration and Control of Smart Structures I   (Technical Session)

No.of Papers: 3  

VIB-11-2

Nonlinear modal analysis   (Technical Session)

No.of Papers: 5  

VIB-10-2

Nonlinear Dynamics of Continuous Systems II   (Technical Session)

No.of Papers: 5  

CIE-19-1

Applications of Symbolic Computation in Engineering   (Technical Session)

No.of Papers: 4  

CIE-18-1

AMS ES Session 1   (Technical Session)

No.of Papers: 4  

CIE-9-3

CAPPD: Emotional Engineering III   (Technical Session)

No.of Papers: 5  

CIE-17-1

CAPPD MTMSM Session 1   (Technical Session)

No.of Papers: 5  

MNS-6-3

Nonlinear Dynamics of MEMS and NEMS II   (Technical Session)

No.of Papers: 5  

MNS-7-1

Measurement and Control in Micro- and Nano-Systems I   (Technical Session)

No.of Papers: 4  

DEC-4-2

Experiential Learning and New Pedagogy for Engineering Education   (Technical Session)

No.of Papers: 4  

DFMLC-9-1

Design for Supply Chain   (Technical Session)

No.of Papers: 4  

DAC-16-2

Simulation-based Design Under Uncertainty   (Technical Session)

No.of Papers: 5  

DAC-19-1

Product Design and Exploration   (Technical Session)

No.of Papers: 5  

MESA-1-8

Keynotes - Fractional Derivatives and Their Applications   (Keynote Session)

No.of Papers: 2  

MSNDC-7-2

d'Alembert Award Keynote Session   (Keynote Session)

No.of Papers: 1  

DTM-10-1

Understanding Innovation   (Technical Session)

No.of Papers: 4  

MECH-8-5

Theory: Motion and Force Design   (Technical Session)

No.of Papers: 4  

MECH-10-3

Synthesis   (Technical Session)

No.of Papers: 4  

MECH-9-5

Protein Kinematics and Screws   (Technical Session)

No.of Papers: 4  

VIB-13-1

Dynamics of Phononic Materials and Structures   (Technical Session)

No.of Papers: 2  

VIB-9-4

Rotor Dynamics and Control IV - Nonlinear Dynamics   (Technical Session)

No.of Papers: 3  

VIB-14-1

Cutting Dynamics and Vibration   (Technical Session)

No.of Papers: 3  

VIB-11-3

Nonlinear dynamic characterization   (Technical Session)

No.of Papers: 3  

CIE-18-2

AMS ES Session 2   (Technical Session)

No.of Papers: 3  

DEC-6-1

Broad Adaptation/Adoption of Design Tools in Engineering Education - Issues and Lessons Learned   (Technical Session)

No.of Papers: 4  

DAC-20-1

Design of Mutlscale Engineering Systems   (Technical Session)

No.of Papers: 4  

DAC-21-1

Multi-objective Optimization and Sensitivity Analysis   (Technical Session)

No.of Papers: 4  

DAC-22-1

Product Family and Product Platform Design   (Technical Session)

No.of Papers: 4  

VIB-15-1

Vibration and Mechanics of Jointed Structures: I   (Technical Session)

No.of Papers: 4  

CIE-20-1

Panel   (Panel Session)

No.of Papers: 5  

DAC-23-1

Design Frontiers: Panel Session   (Panel Session)

No.of Papers: 4  

PTG-10-1

Panel   (Panel Session)

No.of Papers: 1  

MNS-8-1

International Conference on Micro- and Nanosystems Keynote   (Keynote Session)

No.of Papers: 1  

DFMLC-10-1

Design for Manufacturing and the Life Cycle Conference Keynotes   (Keynote Session)

No.of Papers: 2  

MESA-1-9

Numerical Methods of Fractional Calculus   (Technical Session)

No.of Papers: 5  

MSNDC-13-1

Education and Industrial Tools   (Technical Session)

No.of Papers: 4  

MSNDC-12-2

Stability, Dynamics, and Control   (Technical Session)

No.of Papers: 5  

MSNDC-14-1

Nonlinear Analysis   (Technical Session)

No.of Papers: 3  

MESA-13-1

Sensors and Actuators I   (Technical Session)

No.of Papers: 4  

MESA-12-2

Robotics & Mobile Machines II   (Technical Session)

No.of Papers: 5  

CIE-12-3

AMS Session 3 Meshless Methods   (Technical Session)

No.of Papers: 4  

CIE-21-1

SEIKM Knowledge and Information in the Engineering Enterprise   (Technical Session)

No.of Papers: 5  

PTG-4-3

Gear System Dynamics and Noise III   (Technical Session)

No.of Papers: 5  

PTG-11-1

Gear Manufacturing   (Technical Session)

No.of Papers: 5  

DTM-11-1

Challenges in complex/sustainable system design   (Technical Session)

No.of Papers: 4  

AVTT-6-1

Advances in Dynamics and Control of Vehicle Systems and Subsystems I   (Technical Session)

No.of Papers: 5  

MECH-8-6

Analysis Tools for Special Purpose Applications   (Technical Session)

No.of Papers: 5  

MECH-10-4

Control and Applications   (Technical Session)

No.of Papers: 5  

MECH-9-6

Planar Analysis   (Technical Session)

No.of Papers: 4  

VIB-9-5

Rotor Dynamics and Control V - Bearings & Diagnostics   (Technical Session)

No.of Papers: 4  

VIB-12-2

Vibration and Control of Smart Structures II   (Technical Session)

No.of Papers: 4  

VIB-10-3

Nonlinear Dynamics of Continuous Systems III   (Technical Session)

No.of Papers: 5  

CIE-17-2

CAPPD MTMSM Session 2   (Technical Session)

No.of Papers: 4  

MNS-6-4

Dynamics of MEMS and NEMS II: Multi-Modal Systems and the Effects of Damping   (Technical Session)

No.of Papers: 5  

CIE-22-1

Advances in Understanding and Modeling of Corrosion   (Technical Session)

No.of Papers: 5  

DEC-7-1

Innovation and Entrepreneurship in Design   (Technical Session)

No.of Papers: 4  

DFMLC-11-1

Integrated Assembly Design and Planning   (Technical Session)

No.of Papers: 5  

DAC-12-2

Design and Optimization of Sustainable Energy Systems   (Technical Session)

No.of Papers: 4  

DAC-16-3

Simulation-based Design Under Uncertainty   (Technical Session)

No.of Papers: 4  

MESA-1-10

Fractional Order Signal and System Modeling   (Technical Session)

No.of Papers: 4  

MSNDC-12-3

Biomolecular and Granular Systems   (Technical Session)

No.of Papers: 5  

MSNDC-15-1

Experimental Dynamics, Uncertainty, and Validation   (Technical Session)

No.of Papers: 5  

MSNDC-14-2

Applications   (Technical Session)

No.of Papers: 5  

MESA-13-2

Sensors and Actuators II   (Technical Session)

No.of Papers: 5  

MESA-12-3

Robotics & Mobile Machines III   (Technical Session)

No.of Papers: 4  

CIE-12-4

AMS Session 4 CAD/CAE   (Technical Session)

No.of Papers: 4  

PTG-12-1

Bearings   (Technical Session)

No.of Papers: 3  

AVTT-6-2

Advances in Dynamics and Control of Vehicle Systems and Subsystems II   (Technical Session)

No.of Papers: 5  

MECH-10-5

Analysis and Design   (Technical Session)

No.of Papers: 3  

MECH-9-7

Planar and Spatial Synthesis   (Technical Session)

No.of Papers: 4  

VIB-9-6

Rotor Dynamics and Control VI - Analysis   (Technical Session)

No.of Papers: 5  

VIB-14-2

Dynamnics and Vibration in Manufacturing   (Technical Session)

No.of Papers: 4  

VIB-10-4

Nonlinear Dynamics of Continuous Systems IV   (Technical Session)

No.of Papers: 5  

CIE-17-3

CAPPD MTMSM Session 3   (Technical Session)

No.of Papers: 3  

CIE-23-1

Prognostics and Health Management   (Technical Session)

No.of Papers: 4  

MNS-6-5

Dynamics of MEMS and NEMS III: Switches and Related Problems   (Technical Session)

No.of Papers: 5  

MNS-7-2

Measurement and Control in Micro- and Nano-Systems II   (Technical Session)

No.of Papers: 3  

DEC-8-1

Opportunities and Barriers to Bringing Change in Engineering Education   (Technical Session)

No.of Papers: 3  

DFMLC-6-3

Integrated Product Design and Process Development Processes III   (Technical Session)

No.of Papers: 4  

DFMLC-7-2

Life Cycle Decision Making II   (Technical Session)

No.of Papers: 5  

DAC-17-2

Geometric Modeling and Algorithms for Design and Manufacturing   (Technical Session)

No.of Papers: 4  

DAC-14-2

Multidisciplinary Design Optimization (MDO)   (Technical Session)

No.of Papers: 5  

VIB-15-2

Vibration and Mechanics of Jointed Structures: II   (Technical Session)

No.of Papers: 5