ANSYS, Inc. – Booth # 410
275 Technology Dr
Canonsburg, PA 15317
Tel: 866.267.9724
ansysinfo@ansys.com
www.ansys.com

ANSYS provides the engineering and design process insight to help you be first to market with products that realize their promise and revolutionize your business. We develop market and support engineering simulation software used to predict how products will behave and how manufacturing processes will operate in real-world environments. We offer the most comprehensive suite of simulation solvers in the world so that we can confidently predict your product's success.

Bechtel Power Corporation – No Booth
5275 Westview Drive
Frederick, MD 21703
Tel: 301.228.8609
Fax: 240.379.2123
Powernews@bechtel.com
www.bechtel.com

Bechtel is among the most respected engineering, project management, and construction companies in the world. Bechtel operates through five global business units that specialize in civil infrastructure; power generation; communications and transmission; mining and metals; oil, gas and chemicals; and government services.

Since its founding in 1898, Bechtel has worked on more than 22,000 projects in 140 countries on all seven continents. Today, our 53,000 employees team with customers, partners and suppliers on diverse projects in nearly 50 countries. We stand apart for our ability to get the job done right—no matter how big, how complex, or how remote.

CleanAir Performance Group – Booth # 207
7936 Conner Road
Powell, TN 37849
Tel: 865.938.7555
Fax: 865.938.7569
jhaynes@cleanair.com
www.cleanair.com

Since its founding in 1972, CleanAir has an established reputation for excellence on projects of all sizes, ranging from boiler, APC equipment and cooling tower efficiency testing to SCR baseline testing and optimization to hazardous air pollutant (HAPs) studies and CEMS RATAs.

Cleaver-Brooks, Inc. – Booth # 105
6940 Cornhusker Hwy
Lincoln, NE 68507
Tel: 402.434.2000
Fax: 402.434.2064
info@cleaverbrooks.com
www.cleaverbrooks.com

Our Nebraska Boilers, Natcom Burners, and ERI HRSG's have long been the industry benchmarks for quality and engineering. When they're incorporated into a complete system you are getting the best solution, the best efficiency, and the lowest emissions possible. Single source and single responsibility for every aspect of your project.

Conco Systems, Inc. – Booth # 103
530 Jones Street
Verona, PA 15147
Tel: 412.828.1166
Fax: 412.826.8255
info@concosystems.com
www.concosystems.com

Providing “absolutely the best” tube cleaning products and services, Conco stands as the world leader in condenser related products and services for the power generation industry. Our Total Condenser Performance™ lineup of services, including condenser tube cleaning, leak detection and eddy current testing can help ensure your condenser remains efficient and reliable during its operating cycle.

Curran International – Booth # 400
4610 Vicksburg Lane
Dickinson, TX 77539
Tel: 281.339.9993
Fax: 281.339.9994
abarre@curranintl.com
www.curranintl.com

For more than 25 years, Curran International has provided coatings solutions in-shop and on-site around the world. We are a protective coating applications company. Our solutions offer reliable, cost-effective alternatives to expensive pipe and tubular upgrades.

Cutsforth Inc. – Booth # 107
5493 Waschke Road
Bellingham, WA 98226
Tel: 800.290.6458
Fax: 800.398.6561
sthompson@cutsforth.com
www.cutsforth.com

Cutsforth Inc. started back in 1990 as company focused primarily on making replacement brush holders for generators and exciters. After more than 20 years in business, Cutsforth's experience and innovative designs have brought it's best-in-class removable brush holder, collector rings, shaft grounding, and services to some of the world's largest power companies.

D.Z. Atlantic – Booth # 416
5426 Robin Hood Road
Norfolk, VA 23513
Tel: 757.857.6400
Fax: 757.233.7545
kim.massey@dzatlantic.com
www.condenserexperts.com

Day & Zimmermann is a full-service provider of cost-effective maintenance and modification services for every aspect of your plant's operating lifecycle. DZ Atlantic is the world's leading full-scope, turnkey condenser retubing contractor. Our condenser services team represents hundreds of years of combined experience in condenser design, operation, and maintenance. Our innovative designs have resulted in numerous patents for condenser-related products, processes, and equipment. Helium leak detection, rubber dog bone expansion joint replacement, tube staking, and tube cleaning services are also offered.

EST Group, a Business Unit of Curtiss Wright Flow Control – Booth # 317
2701 Township Line Road
Hatfield, PA 19440
Tel: 215. 721.1100
Fax: 215.721.1101
est-info@curtisswright.com
www.estgroup.cwfc.com

EST Group, a business unit of Curtiss-Wright Flow Control Company, is a global manufacturer and designer of tools and systems that greatly simplify the maintenance of shell and tube heat exchangers and the speed-up of in-service inspection of pipe, pipelines, piping systems and pressure vessels.

Excel Services Corporation – Booth # 318
11921 Rockville Pike
Rockville, MD 20852
Tel: 301.984.4400
Fax: 301.984.7600
stephanie@excelservices.com
www.excelservices.com

For more than twenty-six years in the nuclear industry, EXCEL has provided diverse licensing, operations, and engineering services to both domestic and international reactor projects, from security assessments and permit management to supervision of construction and component replacement. EXCEL is uniquely qualified to manage large, complex projects from inception to completion, both supporting the current fleet of reactors and supervising the licensing of the proposed new reactor fleets. Handling multiple facets of nuclear projects, EXCEL provides innovative solutions to complex operational, engineering, safety, and regulatory issues; EXCEL also offers insightful consultation for utility personnel in maintaining and enhancing the quality and safety of their organizations. These services have proven extremely beneficial to nuclear agencies and facilities all over the world. EXCEL’s cumulative experience, expertise, and diverse knowledge base ensure the development of the most cost-effective, best-quality product in accordance with the highest standards of professional excellence.

HSB Global Standards – Booth # 101
1 State Street, Hartford CT 06103
Tel: 1-800-417-3437 ext. 25320
Fax: 1-860-722-5705
www.HSBGlobalStandards.com

HSB Global Standards offers a wide range of inspection services for owners and fabricators of boilers, pressure vessels, nuclear components, and process and power plants. Established in 1866, we provided engineering services to users of steam powered equipment. Today, HSB Global Standards has grown to be a worldwide leader in the interpretation and application of boiler and pressure vessel codes, standards, directives and customer specifications. With local representation and jurisdictional experience, HSB Global Standards provides inspection and certification mandated by the ASME Codes and regulators globally as well as inspection services for many other major boiler and pressure vessel codes of construction.

Idaho National Laboratory – Booth # 119
2525 Fremont Ave
Idaho Falls, ID 83415-3860
Tel: 208-526-7785
Fax: 208-526-2930
Teri.Ehresman@inl.gov
www.inl.gov

Idaho National Laboratory is one of the U.S. Department of Energy's ten multiprogram national laboratories. With more than 4,100 scientists, engineers and support personnel, the lab also stands as one of Idaho’s largest employers. At INL's three primary facility areas – the Advanced Test Reactor Complex, Materials and Fuels Complex, and Research and Education Campus – researchers perform work in support of DOE's mission to "discover the solutions to power and secure America’s future." More specifically, INL is the nation's leading center of nuclear energy research and development. Day-to-day management and operation of the Laboratory is the responsibility of Battelle Energy Alliance.

ILD, Inc./ Evisive, Inc. – Booth # 418
8867 Highland Rd, #378
Baton Rouge, LA 70808
Tel: 225.769.2780 ext. 112
Fax: 225-769-2751
bob@ildpower.com
www.ildpower.com

ILD, Inc.
Since 1981 ILD has provided engineering services to the nuclear and fossil power industries, petrochemical plants, paper mills, and other process industries. We have experienced personnel available for Technical Support/Systems Engineering and Design Engineering duties. We hold international patents on turbine testing equipment that has become the de facto standard for US nuclear power Terry Turbine testing without steam. Our core Principal Engineering Staff has a combined commercial nuclear power experience in excess of 175 man-years. ILD's home office is located in Baton Rouge, LA.

EVISIVE
EVISIVE SCAN microwave non-destructive examination (NDE) technology was patented in the early 1990s. This method was developed primarily to inspect dielectric materials such as rubber expansion joints and fiberglass reinforced piping. This advanced and proven microwave NDE technique has been applied as a field-proven method, in a wide range of dielectrics, including: reinforced rubber, plastics, ceramics, organic and ceramic composites and other advanced materials. It is identified by engineers around the globe as the preferred NDE method for a wide range of dielectric materials.

Intertek APTECH – Booth # 304
16100 Cairnway Dr., Ste 310
Houston, TX 77084
Tel: 832.593.0550
Fax: 832.593.0551
aptech-info-power@intertek.com
www.intertek.com/powergeneration

Intertek APTECH is a full service engineering consulting company specializing in asset integrity and life cycle management in the energy industry. We assist clients in managing the condition of their equipment, solving specific component problems, and increase reliability, focusing on condition assessments, failure analysis, cycling cost evaluation, and reliability improvement projects.

Kawasaki Heavy Industries, Ltd. – Booth # 305
11-1 Minamisuna 2-chome, Koto-ku
Tokyo, 136-8588 Japan
Tel: +81-3-3615-7387
Fax: +81-3-3615-2504
tanaka_hir@khi.co.jp
www.khi.co.jp/english/index.html
www.khi.co.jp/english/kplant/business/energy/nuclear/nucleus.html

Over the past century, Kawasaki has expanded its comprehensive technological base, offering a vast array of products range from motorcycle, rail car, aircraft, vessel, industrial equipment ...etc., as well as wide range of energy facilities. In the booth #305 we would like to introduce:
* Recombiner system for hydrogen mitigation as safety equipment in nuclear plants
* Technologies to decommission nuclear power plant and systems to process radioactive waste.

KEMA – Booth # 403
67 S. Bedford St.
Suite 201 E
Burlington, MA 01803
Tel: 781.273.5700
Fax: 781.229.4867
info.consulting@kema.com
www.kema.com

KEMA provides business and technical consulting, operational support, measurement, inspection, testing and certification services to 500+ energy and utility clients worldwide. Founded in 1927, KEMA delivers a comprehensive range of integrated services that address each link in the energy chain from generation through the consumer side of the meter.

Lectrodryer – Booth # 219
135 Quality Drive
Richmond, KY 40475
Tel: 859.624.2091
Fax: 859.623.2436
info@lectrodryer.com
www.lectrodryer.com

Lectrodryer has designed, engineered, and manufactured desiccant-type drying and purification equipment for the removal of water and other impurities from air, gases, and liquids. Lectrodryer specialize in custom designed, fully skid mounted drying systems to meet special requirements and specifications. Both standard and custom-designed systems are available.

Margan Inc. – Booth # 315
16753 Donwick Dr., Suite A-4
Conroe, TX 77385
Tel: 936.273.1144
Fax: 936.273.1148
us-sales@margan.com
www.margan.com

QAE NDI online inspection of high energy piping, without scaffolds, on running lines, 100% of the line including hanger performance, for all failure mechanisms, at 30%, and 10% of standard NDE cost for baseline and repetitive inspections. Equipment dedicated to the line. Ideal for long-term monitoring programs. Over 85 lines installed.

Mentor Graphics Corporation - Mechanical Analysis Division – Booth # 309
(formerly Flowmaster Group)
8005 SW Boeckman Road
Wilsonville, Oregon 97070
Tel: 847.901.4240
Fax: 847.901.4244
peter_doughty@mentor.com
www.flowmaster.com/power.html

The Mechanical Analysis Division of Mentor Graphics provides 1D & 3D Computational Fluid Dynamics simulation software, electronics thermal testing hardware and consultancy services that help our customers in a wide range of industries worldwide to eliminate mistakes, reduce costs and accelerate their engineering design and maintenance processes. Flowmaster V7 product is a system level 1D fluid simulation software used to evaluate and optimize designs involving internal fluid flow and heat transfer during all stages of development.

National Electric Coil – Booth # 306
800 King Avenue
Columbus, OH 43212
Tel: 614.488.1151
Fax: 614.488.8892
NECService@national-electric-coil.com
www.national-electric-coil.com

NEC specializes in testing, maintenance, repair and upgrading of turbogenerators; hydrogenerators. Provides inspections, condition assessments, failure analysis, and engineering design, manufacturing stator and rotor windings. Service facility includes a high-speed balance pit equipped for overspeed, running electrical and mechanical testing. At owner's site testing, stator rewinds, rewedging, core repair-replacement projects.

Nuclear Systems Associates, Inc. – Booth # 409
2701 Saturn St.
Brea, CA 92821
Tel: 949.499.9980
Fax: 714.996.4712
info@concosystems.com
www.nuclearsyestems.com

Nuclear Systems Associates Inc. (NSA) began operation in 1978. Our first contract, performed for Westinghouse Hanford Co. (WHC), was for the conceptual design of fuel handling equipment for the Fuels and Materials Examination Facility (FMEF), later built at Hanford. As part of this project, NSA performed the detail design, fabrication and testing of all the equipment in the Sample and Analytical Cells. We also designed and built a fuel pin transfer cask and FFTF fuel bundle grapple for this facility. We were instrumental in the conceptual design of the head-end of a commercial fuel reprocessing facility for Exxon Nuclear Company (ENC is no longer in operation). NSA went on to design hot-cell equipment and nuclear waste handling equipment for many commercial and government remote facilities designed or built in the last 30 years.

Pilgrim International LTD – Booth # 206
Southlink
Oldham Lancs, UK 0L4 1DE
Tel: 44.161.785.7700
Fax: 44.161.785.7777
sales@pilgrim-international.co.uk
www.pilgrim-international.co.uk

Pilgrim hydraulic coupling bolts are a quick-release bolting system used on nuclear and fossil steam turbine generators.

Plastocor – Booth # 319
100 Research Road
Hingham, MA 02043
Tel: 724.942.0582
Fax: 724.942.0583
JEMplastocor@aol.com
www.plastocor.com

Plastocor, Inc., is a field service, turnkey (100% solids epoxy materials, Plastocor Labor and Equipment) contractor applying Plastocor protective coatings to main surface condensers and BOP heat exchangers. Plastocor's tubesheet cladding, tube-end coating, full length tube coating, waterbox and channel head coating, service wter pipe coating and flange sealing are specialty applications. All services come with extended labor and material warranties.

Plymouth Tube – Booth #200
29W150 Warrenville Road
Warrenville, IL 60555
Tel: 630.393.3550
Fax: 630.393.3551
sales@plymouth.com
www.plymouth.com

Plymouth is the premier tube manufacturer for the power generation and water processing industries making austenitic, ferritic, and superferritic stainless steels sized from ½ to 2” OD. Plymouth tube proudly offers SEA-CURE® condenser tubing and XtraLowStress® feedwater heater tubing. Visit our exhibit to see how Plymouth Tube can be your power generation tubing solution specialist.

Rentech Boiler Systems – Booth # 201
5025-A  E. Business 20
Abilene, TX 79601-6411
Tel: 325.672.3400
Fax: 325.794.5701
sales@rentechboilers.com
www.rentechboilers.com

RENTECH Boiler Systems is in its second decade of designing and manufacturing high quality custom boilers. RENTECH is a market leader in providing Heat Recovery Steam Generators (HRSG's), Fired Packaged Boilers, Waste Heat Boilers, Specialty Boilers and Emission Control Systems.

RetubeCo, Inc. – Booth # 307
6024 Ooltewah-Georgetown Road
Ooltewah, TN 37363
Tel: 423.238.4814
Fax: 423.238.9028
sales@retubeco.com
www.retubeco.com

Retubeco provides specialized high production retubing tooling packages, technical assistance, specifications, planning, and turnkey services to the level necessary to support your particular condenser or heat exchanger retubing/repair project.

Scientech - A business unit of Curtiss-Wright Flow Control – Booth # 218
200 S. Woodruff
Idaho Falls, ID 83401
Tel: 208.524.9309
Fax: 208.524.9282
performance@curtisswright.com
http://scientech.cwfc.com

Scientech is a leading supplier of equipment, parts, software, and information services to the worldwide power generation industry. The foundation of all Scientech products and services is to enhance the safety, longevity, and efficiency of power plants.

Score Atlanta, Inc – Booth # 405
975 Cobb Place Blvd, Suite 202
Kennesaw, GA 30144
Tel: 770-428-4874
Fax: 770-428-4845
Bobby.Greenlees@score-group.com
www.score-atlanta.com

Score Atlanta Inc, a wholly owned subsidiary of Score Group plc supplies valve condition monitoring systems and services for equipment used in power, oil and gas and similar process industries worldwide. Score Atlanta products include the V-Map on line data acquisition and monitoring system for valves, portable systems used to detect leakage through process plant valves and piping and a complete range of acoustic emissions sensors and data acquisition hardware for monitoring piping, pressure vessels and other steel structures. Score Atlanta also provides on line monitoring services that assist customers with interpretation of test results, maintenance planning for corrective action and engineering services required for permanent installation of condition monitoring sensors and systems.

Score Group plc, founded in 1982 provides valve engineering, specialized testing and design consulting, valve maintenance, repair and recertification services and valve condition monitoring products and services to energy industry customers worldwide. Score Group employs over 1400 valve service professionals and support personnel at 32 locations in 12 countries with its headquarters based in Peterhead, Scotland.  Score currently operates valve management contracts with many of the major oil companies in both the UK and Norwegian sectors of the North Sea.

Siemens Energy, Inc. – Booth # 204
4400 Alafaya Trail
MC Q1-249
Orlando, FL 32826
Tel: 407.736.3409
Fax: 407.736.5645
kelly.lewis@siemens.com
www.siemens.com

Siemens services to support your plant performance and profit, and is dedicated to supporting customers' operating power plant needs through:

• Innovative technology solutions that can help you improve your plant's performance
• Fast, professional help and preventive maintenance to help you run your plant more profitability
• Tailor made service agreements that can help support your long-term operating goals
• Customized programs to help enhance your plant's employee knowledge and skills.

Smitty Radiation Shields/Secure Gate Systems – Booth # 415
907 Rowell Avenue
Joliet, IL 60433
Tel: 866.725.6995
Fax: 815.722.6944
erinn@securegatesystems.net
www.smittyshield.com

Smitty Shields are a new approach to the ALARA concept. Manufactured by Secure Gate Systems, Smitty Shields have been in use since 2010. The ultra-lightweight Smitty Shield allows you to inexpensively shield workers from sources of ionizing radiation. Whether it’s used around the worker or used to shield the radiation source from the workers, it allows very quick assembly with minimal effort. The Smitty Shield allows you to save time, labor and dosage therefore saving money and paying for itself many times over. INPO has recognized this tool as a versatile and strong asset in the radiation shielding program at ‘’Braidwood Nuclear Power Plant’’. The 6’ high Smitty Shield, assembled, weighs less than 50 lbs (sans lead blankets). In addition, they are a two piece unit that allows easy access into and around narrow spaces. Heights are available in six foot, five foot, and four foot high models. Lids are available for the six foot high models.

Team Industrial Services, Inc. – Booth # 202
200 Hermann Drive
Alvin, Texas
Tel: 281.388.5551
Fax: 281.388.5576
Benjamin.schatte@teaminc.com
www.teamindustrialservices.com

Team combines the expertise, innovation and technology that keep your facilities online and in production. Our range of fully integrated industrial services include NDE/NDT Inspection, Field Heat Treating , Valve Repair, Emission Control (LDAR), Leak Repair, Field Machining, Technical Bolting, Valve Insertion,  Isolation Test Plugs and custom Engineering and Manufacturing capabilities.

Thermal Engineering International – Booth # 401
10375 Slusher DR.
Sante Fe Springs, CA 90670
Tel: 323.838.1186
Fax: 323.726.9592
ASiman@thermalengint.com
www.thermalengint.com

Thermal Engineering International (TEi), is a leading supplier of heat transfer technology to the electric power generation industry. TEi offers fully integrated design, engineering, manufacturing, research and development, construction and service capabilities. TEi has been designing and fabricating heat transfer equipment for the world’s power generation industry continuously for more than 55 years. TEi owns and operates dedicated facilities within the U.S. and licensed local shops throughout the world. TEi provides products for conventional fossil generation, nuclear, solar, IPP / NUG / Co-Gen technology and programs utilizing advanced cycle configurations.TEi facilities are dedicated exclusively to the manufacture of feedwater heaters, steam surface condensers, moisture separator reheaters (MSRs) and power plant heat exchangers.

Toshiba Corporation – Booths # 109, 111, 208, 210 & 402
1-1,Shibaura 1-chome, Minato-ku, Tokyo 105-8001 Japan
Tel: +81-3-3457-3717
Fax: +81-3-5444-9191
www3.toshiba.co.jp/power/english/contact/official/mailform/topform_e.htm#notice
www.toshiba.co.jp/nuclearenergy/english/index.htm

Toshiba, with group company Westinghouse Electric Company (WEC), leads the global nuclear industry with capabilities in both Boiling Water Reactors (BWR) and Pressurized Water Reactors (PWR). Our comprehensive research and investment support advances in nuclear power safety and efficiency. Abundant experience in plant construction and ceaseless efforts in technology development assure that we deliver nuclear power plants and services offering high level of safety, reliability and economic efficiency.

Toshiba International Corporation – Booth # 404
6 Dickinson Drive, Bldg 300, Suite 301
Chadds Ford, PA 19317
Tel: 610.496.6337
Fax: 610.459.7846
Cherie.lehensky@psd.toshiba.com
www.toshiba.com/power

Toshiba's Power Generation Services group is an integrated turbine/generator service organization dedicated to providing outage management, repairs and upgrades to Toshiba and other OEM equipment. Its Milwaukee Service Center offers comprehensive repair services for steam turbines and generators, including dynamic balancing, parts manufacturing and a wide range of diagnostic engineering expertise.

Turbo Filtration Corporation – Booth # 300
1490 Telegraph Road
Mobile, AL 36610
Tel: 251.675.8820
Fax: 251.457.8897
TFCoilFlush@aol.com
www.TFCGlobal.com

Turbo Filtration Corporation (TFC) provides quality Turbine Generator Lube Oil System Cleaning Service for Nuclear Turbines; Steam Turbines; Gas Turbines; Combined Cycle; Combustion Turbines; Compressors; and Diesel units. TFC also provides sales/rental filtration equipment: Driflex Oil conditioners 2gpm-32 gpm; Vacuum Dehydrators 1.5 gpm-30 gpm; Filter skids 100 gpm-850 gpm; and Oil heaters.

Valtimet, Inc. – Booth # 302
5501 Air Park Blvd
Morristown, TN 37183
Tel: 423.585.4235
Fax: 423.585.4215
us.contact@valtimet.com
www.Valtimet.com

Valtimet is a world leader in the production of welded titanium, austenitic & ferritic stainless steel, ValBrite ® super stainless, Fine Fin ® extended surface tubing and other tube materials for steam surface condensers, feedwater heaters, MSR's and BOP heat transfer equipment for Power Generation, Chemical Process, Desalination, LNG and other specialized industries. Valtimet has seven plants in the following counties:  USA, France, China, Korea & India.

The Westerman Companies – Booth # 205
245 N Broad St.
P.O. Box 125
Bremen, Ohio 43107-9903
Tel: 740.569.4143
Fax: 740.569.4111
bmoore@westermancompanies.com
www.westermancompanies.com/

The Westerman Companies, International leadership in engineering and fabrication, concentrating in the Oil and Gas and Nuclear markets. Westerman quality standards includes ASME stamps "N","NS","NPT","NA","U","UM","PP","R",and NQA-1,10CFR50 (Appendix B) 10CFR21,10CFR71(Subpart H),ISO 9001:2008.

Westinghouse Electric Company – Booths # 301,303
1000 Westinghouse Drive
Suite 170
Cranberry Township, PA 16066
Tel: 412.374.2558
Fax: 724-940-8518
rossmams@westinghouse.com
www.westinghousenuclear.com

Westinghouse Electric Company is the only company with a single focus on nuclear power, providing a wide range of nuclear plant products and services to utilities throughout the world. Our more than 14,000 employees worldwide provide fuel, spent fuel management, service and maintenance, instrumentation and control, and advanced nuclear plant designs. With the world's largest base of installed plants, no company has more nuclear experience.

With the combined resources of Westinghouse and Toshiba, an even broader range of products and services will be available to our customers, furthering our commitment to providing solutions that help achieve reduced outage times, reduced operating costs, and clean, efficient plant operations.