Mr. Andrew Bosco, Staff Engineer – Advanced Product Engineering, General Motors
Presentation Title: Automotive Fuel Cells – Path to Commercialization

Dr. Robert Braun, Senior Staff Engineer, Thermo-Fluid Dynamics Group, United Technologies
Presentation Title: System Architectures for SOFC-based APUs in Future Commercial Aircraft Applications

Dr. Mark Davis, National Institute of Standards and Technology
Presentation Title: Investigating the Economic Feasibility of Residential Fuel Cells Using Empirical Models

Dr. James Fenton, Director: Florida Solar Energy Center, Professor Mechanical, Materials and Aerospace Engineering, University of Central Florida
Presentation Title: Durability and Degradation of Nafion^® and Nafion^® Composite Membranes in Working PEM Fuel Cells

Dr. Yoshinobu Fujishiro, AIST
Presentation Title: Development of New Advanced Electrochemical Ceramic Reactor for Micro Tubular Cells and the Stacked SOFC Modules

Dr. John Irvine, Professor, The University of St. Andrews
Presentation Title: Fueling the Future, New Anode Chemistry for High Temperature Fuel Cells

Dr. Moe Khaleel, Lab Fellow & Division Director, Pacific Northwest National Laboratory
Presentation Title: Experiments and Modeling of the Time-Dependent Behavior of Planar Anode-Supported SOFC

Dr. Frank Lomax, Vice President Technology, H2Gen Innovations, Inc.
Presentation Title: Onsite hydrogen production - commercial status and future developments

Dr. Bruce Logan, Kappe Professor of Environmental Engineering, Director: Engineering Environment Institute, Director: Hydrogen Energy (H2E) Center, Pennsylvania State University
Presentation Title: Electricity of Hydrogen Production Using Microbial Fuel Cell Technologies

Dr. Nguyen Minh, Hybrid Power Generation Systems, General Electric Power Systems
Presentation Title: Solid Oxide Fuel Cell Technology: Progress toward Multi-MW Stationary Power Generation Applications

Dr. Pinakin Patel, Director, Research and Special Systems, FuelCell Energy, Inc.
Presentation Title: Co-production of Hydrogen and Electricity Using High Temperature Fuel Cells

Mr. Michael Perry, Manager, Advanced Transportation Systems, UTC Power
Presentation Title: Start and Operation of PEMFC Stacks under Sub-Freezing Conditions

Dr. Frank Preli, Vice President of Engineering, UTC Power
Presentation Title: Progress in Improving Durability of PEM Fuel Cells

Mr. Robert Roy, Design Engineering Manager – Electrochemical Products, Hamilton Sundstrand
Presentation Title: Design Approaches for SPE^® Water Electrolysis Systems

Dr. Rowland Travis, Head of Design Analysis, Rolls-Royce Fuel Cell Systems, Ltd.
Presentation Title: Towards a 1MW Pressurized Fuel Cell System

Dr. Jason Trembly, NETL Research Associate, Fuel Cell Research Group, Energy System Dynamics, U.S. Department of Energy, NETL
Presentation Title: The Effect of Trace Coal Syngas Species on the Performance of a Solid Oxide Fuel Cell

Dr. Chao-Yang Wang, Director, Electrochemical Engine Center, Pennsylvania State University
Presentation Title: Principles of Subzero startup of Polymer Electrolyte Fuel Cells

Dr. Hisataka Yakabe, Senior Researcher, SOFC Project Group, Tokyo Gas Co., LTD.
Presentation Title: In-Situ Stress Measurements for the Electrolyte of SOFCs Under Cell Operations

Dr. Gary Yang, Chief Scientist – Energy Materials, Pacific Northwest National Laboratory
Presentation Title: Advanced SOFC Interconnect and Its Interfaces Development at PNNL

Dr. Tim S. Zhao, Professor, The Hong Kong University of Science and Technology
Presentation Title: Mass Transport of Water in Direct Methanol Fuel Cells